215777
49
Zoom out
Zoom in
Previous page
1/77
Next page
49
Setting
Ceiling
Rear
Ceiling
When this function is set to On,” the picture is top/bottom
and left/right reversed. This function is used to project the
image from a ceiling-mounted projector.
Rear
When this function is set to On,” the picture is left/right
reversed. This function is used to project the image to a
rear projection screen.
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the back
of the projector is switchable for computer input or monitor
output (p.10). Select Computer 2 or Monitor Out with the
Point 7 8 buttons.
Computer 2……computer input
Monitor Out……monitor out
Terminal function is not available when Computer 2 to the
input source is selected. Change the input source to the
others (Computer1 or Video) so that the Terminal function is
available (pp.27, 37–38).
Input search
This function detects the input signal automatically.
When finding a signal, the search will stop. Use the
Point 7 8 buttons to select one of the followings.
Off …… Input search does not work.
On1 …… Input search works under the situation below.
When the AUTO SET button on the remote
control is pressed.
On2 …… Input search works under the situation below.
When the projector is turned on with
pressing the ON/STAND-BY button on the top
control or on the remote control. (After the
countdown)
When the AUTO SET button on the remote
control is pressed.
•When the current input signal is missed.✳
✳If the No show or Freeze function is active, cancel it
to activate the Input search. It is not available when
On-Screen menu is displayed.
Note:
Input search and Auto PC Adj. cannot be set
to Off” at the same time.
While Input search is set On1 or On2, the
status of Input and Lamp are displayed every
time the signal is switched.
Only the input source selected at the last
time can be detected.
If the AUTO SET button on the remote
control is pressed while Input search is on,
Input search will stop and go back to the
previous input signal.
The input source can be switched by
pressing the COMPUTER, VIDEO, S-VIDEO,
COMPONENT, or NETWORK button on the
remote control while Input search is on.
Sync on Green signal does not support Input
search.
Input search does not work for Wired/
Wireless Network input sources.
If the INPUT button on the top control is
pressed while Input search is on, Input
search will stop.
The Auto PC adjustment function can be
operated directly with the AUTO PC button on
the remote control even when Auto PC adj. is
set to Off” in the Auto setup setting.
Auto setup
This function enables Input search and Auto PC adjustment
by pressing the AUTO SET button on the remote control.
Settings for those functions can be altered as follows:
Auto PC adj.
On . . . . . Enables Auto PC Adjustment when pressing
the AUTO SET button on the remote control.
Off . . . . . Disables Auto PC Adjustment.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo plc xl51 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo plc xl51 in the language / languages: English as an attachment in your email.

The manual is 9,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info