215777
46
Zoom out
Zoom in
Previous page
1/77
Next page
46
Display
Blue back
Press the Point 7 8 buttons to switch on/off. When this
function is On,” a blue image is displayed while the input
signal is not detected.
Press the Point 7 8 buttons to switch on/off. This function
decides to display the On-Screen Displays.
On ………………… Display all the On-Screen Displays. Use this
function when you want to project images
after the lamp becomes bright enough. This
mode is set as a default.
Countdown off… Display the input image instead of the
countdown when turning on the projector.
Use this function when you want
to project the image as early as possible even
when the lamp is not bright enough.
Off………………… Do not show the On-Screen Displays. except:
lOn-Screen Menu
l “Power off?”
lP-Timer
l “No signal” for Power management item (p.50)
l”Please wait...
lArrows for panning mode (p.36)
Setting
Uniformity adj.
This function adjusts the brightness uniformity on a screen.
Select either Store 1, Store 2 or Reset with the Point 7
8
buttons, and then press the SELECT button. Press the
Point 7 8 buttons to adjust the brightness uniformity (from
0 to 7).
Store 1…… Store the uniformity adjustment even when the
projector is turned off. Reset the uniformity
adjustment when the AC power cord is unplugged.
Store 2…… Store the uniformity adjustment even when the
projector is turned off or the AC power cord is
unplugged.
Reset…….. Reset the Uniformity adjustment when the
projector is turned off or the AC power cord is
unplugged.
Note:
Sometimes, the brightness uniformity can not be
adjusted under certain conditions. With the adjustment
of brightness uniformity, the balance of color or contrast
also changes.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo plc xl51 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo plc xl51 in the language / languages: English as an attachment in your email.

The manual is 9,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info