Manual Sanyo PLC-XL51 (page 51 of 77) (English)

489448

Zoom out

Zoom in

1/77

Setting

Remote control

This projector provides two different remote control codes;

the factory-set, initial code (Code 1) and the secondary code

(Code 2). This switching function prevents remote control

interference when several projectors or video equipment

are operated at the same time.

When the projector is operated in “Code 2,” both the

projector and the remote control must be switched to

“Code 2.”

To change the code for the projector:

Select either “Code 1” or “Code 2” in this Setting Menu.

To change the code for the remote control:

Press and hold both the MENU and IMAGE buttons

together for more than 5 seconds. After changing the code,

make sure the remote control operates properly.

Remote control

Press and hold

MENU and

IMAGE buttons

for more than 5

seconds.

✔Note:

• When different codes are set on the projector and on the

remote control, any operation cannot be made. In that

case, switch the code on the remote control to fit the

code on the projector.

• If the batteries are removed from the remote control for a

long period of time, the remote control code will be reset.

Security (Key lock, PIN code lock, Alarm settings)

This function allows you to use the Key lock, PIN code lock,

and Alarm function to set the security for the projector

operation.

Key lock

This function locks the top control and remote control

buttons to prevent operation by unauthorized persons.

..... Unlocked.

..... Lock the operation of the top control. To

unlock, use the remote control.

..... Lock the operation of the remote control.

To unlock, use the top control.

If the top control accidentally becomes locked and

you do not have the remote control nearby or there is

something wrong with your remote control, contact the

dealer where you purchased the projector or the service

center.

Key lock

Select Key lock. Use

the Point

ed buttons

to choose one of the

options and select

[Yes] to activate it.

Lamp control

You can change the brightness of the screen.

Normal … Normal brightness

Auto …… Brightness according with the input signal

Eco …… Lower brightness reduces the lamp power

consumption and extends the lamp life.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC-XL51 in the language / languages: English as an attachment in your email.

The manual is 9,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sanyo PLC-XL51 Manual

Product: