57
Setting
The PIN code can be changed to your desired four-digit
number.
Select "PJ PIN code change" with the Control pad, and press
the SELECT button. The PIN code input dialog box will appear.
Enter a current PIN code, and then a new PIN code as follows:
Select a number with the Control pad and fix the number with
the SELECT button. Repeat it to complete entering a four-digit
number. When the four-digit number is fixed, move the pointer
to "Ent". Then press the SELECT button.
To Change PJ PIN Code
Select Off, On1, or On2 with the Control pad and then press
the SELECT button.
To Change the PJ PIN Code setting
CAUTION:
WHEN YOU HAVE CHANGED PIN CODE, WRITE DOWN THE
NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO
ON PAGE 81, AND KEEP IT SECURELY. SHOULD THE PIN
CODE BE LOST OR FORGOTTEN, THE PROJECTOR CAN NO
LONGER BE OPERATED.
Enter a PIN code
Enter a PJ PIN code
Select a number with using the Control pad and fix the number
with the SELECT button. The number will change to "✳". If you
fixed a wrong number, move the pointer to "C" once with the
Control pad to clear the number. Enter the correct number
again.
Repeat this step to complete entering a four-digit number.
When the four-digit number is fixed, move to "Ent". Press the
SELECT button so that you can change the following PIN code
lock settings.
If you entered a wrong PIN code, the number (✳✳✳✳) will turn
red and disappear. Enter a correct PIN code all over again.
Change the PIN code
Select PJ PIN code change and press
the SELECT button. The PIN code input
dialog box will appear.
Select a desired
setting with the
Control pad and
press the SELECT
button.
Change the PJ Lock setting
The input numbers
change to “✳” for
security.
PJ lock
This function prevents the projector from being operated by an
unauthorized person and provides the following settings for
security options.
On1
. . . . . .requires to enter the PIN code every time turning on
the projector.
On2
. . . .requires to enter the PIN code to operate the
projector once the power cord is disconnected; as
long as the AC power cord is connected, the
projector can be operated without the PIN code.
Off
. . . . .the projector is unlocked with the PIN code. To
release PJ lock, select this setting.
Whenever to change the PIN code (the four-digit number), you
are required to enter the PIN code. "1234" is set as the initial PIN
code at the factory.
PJ lock
When the projector is
locked with the PIN
code, the PJ lock mark
appears at top left of
the Main menu.
Setting
Pointer
Pointer
The setting selected.
