215459
7
Zoom out
Zoom in
Previous page
1/79
Next page
7
Use the projector properly in specified positions.
Improper positioning may reduce the lamp life and
result in severe accident or fire hazard.
Installing the Projector
in Proper Directions
Avoid positioning the projector as described below
when installing.
Positioning Precautions
Do not roll the projector more
than 10 degrees from side to
side.
For ceiling mounting, you need the ceiling
mount kit designed for this projector. When
not mounted properly, the projector may fall,
causing hazards or injury. For details, consult
your dealer. The warranty on this projector
does not cover any damage caused by use
of any non-recommended ceiling mount kit
or installation of the ceiling mount kit in an
improper location.
CAUTION ON CEILING MOUNTING
Safety Instructions
NO UPWARD
Do not point the projector up
to project an image.
10˚
10˚
NO DOWNWARD
NO SIDEWAYS
Do not point the projector
down to project an image.
Do not put the projector
on either side to project an
image.
IMPORTANT!
Filter Maintenance!!
The projector uses a lamp which generates significant
heat. The cooling fans and air vents are provided to
dissipate the heat by drawing air into the housing and
the filter is located in the intake vents to prevent dust
from getting inside of the projector.
In order to care for the projector appropriately, regular
cleaning is required. Remove any dirt or dust that has
accumulated on the projector or in the filter.
If the projector reaches a time set in the timer setting,
a Filter warning icon (Fig. 1) appears on the screen.
Blocking the air vents and leaving the projector
uncleaned for a long time may not only damage the
projector and may require costly repairs but may also
cause accidents or fire.
For maintenance of the filter, refer to “Filter counter”
on page 54 and “Maintenance and Care” on pages 55.
Damages to the projector caused by using an
uncleaned filter or improper maintenance will void
the warranty on the projector.
Fig.1 Filter warning icon
10˚
10˚
Do not pitch the projector
more than 10 degrees
backward and forward.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo plc xf47 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo plc xf47 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info