Manual Sanyo plc xf46 (page 8 of 64) (English)

214573

Zoom out

Zoom in

1/64

PREPARATION

SETTING-UP PROJECTOR

This projector uses nominal input voltages of 120 V or

200-240 V AC. This projector automatically selects

correct input voltage. It is designed to work with single-

phase power systems having a grounded neutral

conductor. To reduce risk of electrical shock, do not plug

into any other type of power system.

Consult your authorized dealer or service station if you

are not sure of type of power supply being in use.

Connect a projector with peripheral equipment before

turning a projector on. (Refer to pages 13 ~ 16 for

connection.)

CONNECTING AC POWER CORD

Connect AC Power Cord (supplied) to

a projector.

AC outlet must be near this equipment

and must be easily accessible.

To POWER CORD

CONNECTOR on a

projector.

Projector side AC Outlet side

Ground

NOTE ON POWER CORD

AC Power Cord must meet requirement of country where you use a projector.

Confirm AC plug type with chart below and proper AC power cord must be used.

If supplied AC Power Cord does not match AC outlet, contact your sales dealer.

To the AC Outlet.

(120 V AC)

For Continental Europe

For the U.S.A. and Canada

For the U.K.

To the AC Outlet.

(200 - 240 V AC)

To the AC Outlet.

(200 - 240 V AC)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo plc xf46 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sanyo plc xf46 Manual

Product: