489588
66
Zoom out
Zoom in
Previous page
1/80
Next page
66
Image is Left/Right reversed
Image is Top/Bottom reversed
Check the Ceiling/Rear function. (See page 50)
Check the Ceiling function. (See page 50)
No sound
Check audio cable connections from the audio input source.
Adjust the audio source.
Press the VOLUME + button. (See page 23)
Press the MUTE button. (See page 23)
Is the image projected? You will hear the sound only when the
image is projected.
The color is strange
Check the Input signal, color system, video system or computer
system mode.
Make sure the "Blackboard" or "Colorboard" is not selected on
Image select menu. (see pages 31, 32, 40, 41)
Auto PC adjustment function
does not work
Check the Input signal. Auto PC function can not work when
480p, 575p, 720p, 480i, 575i, 1035i or 1080i is selected, or digital
signal is input into DVI terminal. (see Page 28)
The setting does not remain after
turning off power
Make sure you select "Store" after adjusting setting. Some settings
can not be stored if not registered with "Store". (see pages 30, 43)
Some displays are not seen
during operations
Check the Display item. (See page 47)
Power management does not
work
Power management function can not work while "Freeze" or "No
Show" function is running. (see pages 23,24)
Capture function does not work
Check the connection and the input signal to see if there is signal.
Auto setup does not work
properly
Make sure "Off" is not selected at any function of "Auto setup".
(see page 46)
Make sure "On" is not selected at the Ceiling function.
(see page 50)
Auto keystone does not work
properly even when the projector
is tipped
Make sure the Auto keystone function is not set to "Manual". Press
the AUTO SETUP button on the top control or the AUTO SET
button on the remote control. (see pages 22, 46)
The image is distorted or runs off
Check PC adjustment menu or Screen menu and adjust them.
(see pages 29-30, 34-35)
PIN code dialog box appears at
the start-up
PIN code lock is being set. Input a PIN code (1234 or numbers you
have set). (See pages 18, 53 and 54)
Appendix
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLC-XC50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC-XC50 in the language / languages: English as an attachment in your email.

The manual is 5,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sanyo PLC-XC50

Sanyo PLC-XC50 User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info