569863
40
Zoom out
Zoom in
Previous page
1/41
Next page
HANDLEIDING
Seriëel controlemenu
Op deze projector staat een functie om de werkzaamheden te controleren door het gebruik van de RS-232C
seriële poort.
Verbinding en werking
Verbind een RS-232C seriële kabel met de RS-232C poort op de projector en de seriële poort op de
PC.
Installeer een communicatiesoftware die bij de PC geleverd werd en stel als volgt in:
Stuur de commando’s via de HEX sleutel (HEX varieert tussen 0-9 en a-f) om de projector te
controleren
.
Baudsnelheid : 19200 bps
Pariteit : none
Stop bit : 1
Flow control : none
Data bit : 8
Commandoformaat
het commando wordt van de PC naar de projector gezonden met een formaat als in de tabel hieronder. De
projector decodeert het commando en zend de bevestiging 'ACK' = '06' terug.
De tabel hieronder toont de typische commando’s om de projector te controleren. Raadpleeg uw lokale verkoper
voor meer informatie over andere commando’s.
Commando Commandostrings (HEX)
Stroom AAN BE EF 10 05 00 C6 FF 11 11 01 00 01 00
Stroom AF BE EF 02 06 00 57 D0 2E 00 00 00 00 00
Menu BE EF 02 06 00 C8 D7 01 00 00 00 00 00
omhoog BE EF 02 06 00 FB D7 02 00 00 00 00 00
omlaag BE EF 02 06 00 2A D6 03 00 00 00 00 00
Links BE EF 02 06 00 9D D7 04 00 00 00 00 00
Rechts BE EF 02 06 00 4C D6 05 00 00 00 00 00
Input BE EF 02 06 00 7F D6 06 00 00 00 00 00
Auto PC Adj. BE EF 02 06 00 58 D5 11 00 00 00 00 00
Stil BE EF 02 06 00 51 D7 08 00 00 00 00 00
Keystone OMHOOG BE EF 02 06 00 E0 D1 29 00 00 00 00 00
Keystone OMLAAG BE EF 02 06 00 D3 D1 2A 00 00 00 00 00
Volume OMHOOG BE EF 02 06 00 62 D7 0B 00 00 00 00 00
Volume OMLAAG BE EF 02 06 00 D5 D6 0C 00 00 00 00 00
GEEN BEELD BE EF 02 06 00 CE D0 27 00 00 00 00 00
Stilstaand beeld BE EF 02 06 00 02 D0 2B 00 00 00 00 00
Aspect BE EF 02 06 00 31 D0 28 00 00 00 00 00
Select Compute
r
(Analoog)
BE EF 02 06 00 0B D2 32 00 00 00 00 00
Select Component BE EF 02 06 00 DA D3 33 00 00 00 00 00
Select S-Video BE EF 02 06 00 6D D2 34 00 00 00 00 00
Select Video BE EF 02 06 00 BC D3 35 00 00 00 00 00
Select Computer (Digitaal) BE EF 02 06 00 8F D3 36 00 00 00 00 00
40
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLC-WXU10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC-WXU10 in the language / languages: Dutch as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info