Manual Sanyo plc wxe45 (page 60 of 71) (English)

216253

Zoom out

Zoom in

1/71

Picture is not bri�ht enou�h.

– Check if "Contrast" or "Brightness" are adjusted properly (see Check if "Contrast" or "Brightness" are adjusted properly (seeCheckif"Contrast"or"Brightness"areadjustedproperly(see(see

pages31,38)..

– Check if "Image level" is selected properly (see pages 30 Check if "Image level" is selected properly (see pages 30Checkif"Imagelevel"isselectedproperly(see pages 30(seepages30,37)..

– Check the LAMP REPLACE indicator. If it lights, the end of lamp Check the LAMP REPLACE indicator. If it lights, the end of lampChecktheLAMPREPLACEindicator.Ifitlights,theendoflamp

lifeisapproaching.Replacethelampwithanewonepromptly

(seepages57-58,64)..

– Check the Lamp control function (see pages 24, 46). Check the Lamp control function (see pages 24, 46).ChecktheLampcontrolfunction(see pages 24, 46).(seepages24,46).

The color is stran�e.

– Check the Input signal, color system, video system, or computer

systemmode.

– AdjusttheImagelevelproperly(seepages31,38).

Ima�e is Left/Ri�ht reversed.

Ima�e is Top/Bottom reversed.

– ChecktheCeiling/Rearfunction(seepage44).

– ChecktheCeilingfunction(seepage44).

The ima�e is distorted or runs off.

– Check the PC Adjustment menu or Screen menu and adjust them Check the PC Adjustment menu or Screen menu and adjust themCheckthePCAdjustmentmenuorScreenmenuandadjustthem

(seepages26-29,32-33,40).

No sound

– Checktheaudiocableconnectionfromaudioinputsource.

– Adjusttheaudiosource.

– PresstheVolume+button(seepage23).

– PresstheMutebutton(seepage23).

– When the AUDIO OUT is plugged in, the projector's built-inWhentheAUDIOOUTispluggedin,theprojector'sbuilt-in

speakerisnotavailable.

– Is the image projected? You will hear the sound only when the

imageisprojected.

Some displays are not seen durin�

the operation.

– ChecktheDisplayfunction(seepage41).

Auto PC adjustment function does

not work.

– Check the Input signal. Auto PC Adjustment function can not work Check the Input signal. Auto PC Adjustment function can not workChecktheInputsignal.AutoPCAdjustmentfunctioncannotwork

when480p,575p,720p,480i,575i,1035i,or1080iisselected(see

page27).

The settin� does not remain after

turnin� off power.

– Make sure you selected “Store” after adjusting settings. Some Make sure you selected “Store” after adjusting settings. SomeMakesureyouselected“Store”afteradjustingsettings.Some

settingscannotbestoredifnotregisteredwith“Store.”

Power mana�ement function does

not work.

– Power management function cannot work while "Freeze" or "NoPower management function cannot work while "Freeze" or "No

Show"functionisrunning..

Ima�e disappears automatically

– Check the power management function in the Setting. The powerCheckthepowermanagementfunctionintheSetting.Thepower

managementissetto“On”atthefactory.

Capture function does not work.

– Check the connection and the Input signal to see if there is signal.ChecktheconnectionandtheInputsignaltoseeifthereissignal.

The Remote Control does not work.

– Checkthebatteries.

– Makesurenoobstructionisbetweentheprojectorandtheremote

control.

– Make sure you are not too far from the projector when using the

remotecontrol.Maximumoperatingrangeis16.4’(5m).

– Makesure the codeoftheremotecontrol is conformedtothatof

theprojector(seepage46).

Appendix

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo plc wxe45 in the language / languages: English as an attachment in your email.

The manual is 4,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sanyo plc wxe45 Manual

Product: