542436

Sanyo PLC-WM 4500 Manual

49
Zoom out
Zoom in
Previous page
1/91
Next page
49
Video Input
1
2
Press the MENU button to display the On-Screen Menu. Use
the Point pq buttons to select Screen and then press the
Point u or the SELECT button.
Use the Point pq buttons to select the desired item
and then press the SELECT button.
Screen Size Adjustment
PNote:
• When no signal is detected, Normal is set automatically
and the Aspect dialog box disappears.
• The adjustable range for Scale H/V and Position H/V
are limited depending on the input signal.
• Natural wide cannot be selected when 720p, 1035i,
1080i or 1080p is selected on AV System Menu (p.45).
Custom adj.
Provide the image within a screen size keeping its original aspect
ratio.
Provide the image at the 16:9 wide screen ratio.
Normal
Wide(16:9)
Custom adj.
Scale the image proportionally to fit the entire screen. Either side of
image may go over the screen.
Provide the image to fit full screen size.
Full
Expand the right and left side of images naturally without changing
the center areas.
Natural Wide
Zoom
Custom
Provide the last stored aspect screen image.
Adjust the screen scale and position manually with this function.
Press the Point u button at Custom adj. and the Custom adjustment
menu is displayed on the screen, you can use the Point pq buttons
to choose the item you want to adjust.
Scale H/V ............. Adjust the Horizontal/Vertical screen scale.
H&V ...................... When set to On, the aspect ratio is fixed.
Scale V appears dimmed and becomes
unavailable. Adjust Scale H, then the screen
scale is automatically modified based on the
aspect ratio.
Position H/V...........Adjust the Horizontal/Vertical screen position.
Common .............. Save the adjusted scale or position to all the
inputs. Press the SELECT button at Common
to display a confirmation box. To save the
scale or position, press the SELECT button at
"Yes", When Custom is selected, the saved
scale or position is used.
Reset ................... Reset all the adjusted values. Press the
SELECT button at Reset to display a
confirmation box. To reset, press the SELECT
button at Yes.
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLC-WM 4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC-WM 4500 in the language / languages: English as an attachment in your email.

The manual is 10,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info