214397
50
Zoom out
Zoom in
Previous page
1/60
Next page
50
Tr oubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
Make sure you have properly connected the projector to peripheral equipment as described in "Connecting to a Computer"
and “Connecting to Video Equipment” on page15,16.
Make sure all equipment is connected to AC outlet and the power is turned on.
When you operate the projector with a computer and it does not project an image, restart the computer.
Appendix
Problem: Solutions
No power Plug the power cord of the projector into the AC outlet.
See if the POWER indicator lights red.
Wait 90-120 seconds after the projector is turned OFF when turning the
projector back on. The projector can be turned on after the POWER
indicator turns red. (See “Turning Off the Projector” on page 18.)
Check the WARNING indicator. If the WARNING indicator lights red, the
projector cannot be turned on. (See "Warning Indicator" on page 45.)
Check the projection lamp. (See page 48.)
Unlock Key lock for the projector in the Setting Menu. (See page 42.)
Image is out of focus. Adjust focus of the projector. (See page 19.)
Provide proper distance between the projector and the projection
screen. (See page 13.)
Check the projection lens to see if it needs cleaning. (See page 47.)
Moving the projector from a cool to a warm place may result in moisture
condensation on the projection lens. In such cases, leave the projector
OFF and wait until condensation disappears.
No image Check the connection between your computer or video equipment
and the projector. (See page 15, 16)
See if the input signal is correctly output from your computer. Some
laptop computers may need to change the setting for monitor output when
connecting to a projector. See your computer’s instruction manual for the
setting.
It takes about 20 seconds to display an image after turning on the projector.
See if the selected system is corresponding with your computer or video
equipment. (See page 25 and 33)
Select correct input source once again through menu operation.
(See page 24, 32)
Make sure the temperature is not out of the specified Operating
Temperature (5°C ~ 35°C).
Image is Left/Right reversed. Check the Ceiling / Rear item. (See “Setting” on page 40.)
Image is Top/Bottom reversed. Check the Ceiling item. (See “Setting” on page 40.)
No sound – Check audio cable connection from audio input source.
– Adjust the audio source.
– Press the Volume (+) button. (See page 23.)
– Press the Mute button. (See page 23.)
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo plc sw35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo plc sw35 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info