569927

Sanyo PLC SL15 Manual

14
Zoom out
Zoom in
Previous page
1/48
Next page
14
BEFORE OPERATION
OPERATION OF REMOTE CONTROL
FOCUS BUTTON
Used to adjust focus. (P20)
AUTO PC ADJ. BUTTON
Use to operate AUTO PC
Adjustment function. (P25)
KEYSTONE BUTTON
Used to correct keystone
distortion. (P20, 36)
IMAGE BUTTON
Used to select image level.
(P28, 33)
FREEZE
SELECT
D.ZOOM
MUTE
VOLUME
-
MENU
NO SHOW
IMAGE
VOLUME
+
KEYSTONE
LASER
P-TIMER
ZOOM
COMPUTER
FOCUS
AUTO PC
ON-OFF
LOCK
VIDEO
ON
ALL OFF
ALL-OFF SWITCH
Left Side
When using the Remote Control,
turn this switch to “ON.” And turn it
to “ALL OFF” when it is not used.
This Remote Control emits a laser beam as laser pointer function from the Laser Light Window. When the LASER button is
pressed, laser light goes on. And when the LASER button is being pressed for more than 1 minute or the LASER button is
released, light goes off. The LASER POINTER INDICATOR lights RED and Laser is emitted with RED light to indicate laser
beam is being emitted.
The Laser emitted is a class II laser; therefore, do not look into the Laser Light Window or shine the laser beam on yourself or
other people. Three marks below are caution labels for laser beam.
CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result
hazardous radiation exposure.
Laser Light Window
These caution labels are put on remote control.
LASER POINTER FUNCTION
POWER ON-OFF BUTTON
Used to turn the projector
on or off. (P19)
LASER BUTTON
Used to operate Laser
Pointer function. Laser
beam is emitted while
pressing this button within
1 minute.
When using this Laser
Pointer for more than 1
minute, release the LASER
button and press it again.
The indicator lights red
while the laser beam is
emitted from Laser Light
Window. It lights green in
drag ON position. (P40)
LASER POINTER (Drag ON)
INDICATOR
LASER POINTER INDICATOR
MUTE BUTTON
Used to mute sound. (P21)
SW1 SW2 SW3 Code No.
DIP SWITCH SETTING
SW4 ........ LASER ON/OFF
4
ON
321
Code 1ON ON Code 1ON
Code 4ON OFF
Code 2ON OFF
Code 3ON ON
Code 5OFF ON
Code 6OFF OFF
Code 7OFF ON
Code 8OFF
ON
OFF
ON
OFF
ON
ON
OFF
OFF OFF
DIP SWITCH IN THE BATTERY
COMPARTMENT
The SW4 is used for laser pointer
on/off switching. SW1-3 is used to
change the Remote Control code. Set
each switch as shown in the table
below. Refer to the menu item
"Remote control" in the SETTING
Menu on page 37.
See page 40 for details.
COMPUTER MOUSE
OPERATION BUTTONS
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLC SL15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC SL15 in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sanyo PLC SL15

Sanyo PLC SL15 User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info