Manual Sanyo PLC SE20 (page 14 of 56) (English)

569926

Zoom out

Zoom in

1/56

Part Names and Functions

This projector has eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other

seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several

projectors or video equipment at the same time. (Change the remote control code for the projector first before changing

that for the remote control. See “Remote control” on page 40.)

While pressing the MENU button, press the IMAGE button

number of times corresponding to each remote control code

number. Each time you press the IMAGE button, the code is

changed sequentially. (See the list below.)

To initialize the remote control code for the remote control,

slide the RESET/ON/ALL-OFF switch to the RESET, and then

to the ON. The initial code is Code 1.

Remote Control Code

While pressing the MENU button,

press the IMAGE button number of

times corresponding to the remote

control code for the projector.

Remote Control Code

Number of Times of

Pressing IMAGE Button

Code 1 1

Code 2 2

Code 3 3

Code 4 4

Code 5 5

Code 6 6

Code 7 7

Code 8 8

MENU button

IMAGE button

The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect

your computer and the projector with the supplied USB cable. (See page 17 for connection.) When the Pointer function is

used, the wireless mouse is not available.

Wireless Mouse Operation

Move the pointer on the screen

with this button.

PRESENTATION POINTER button

R-CLICK button

L-CLICK button

Acts as right click while the

projector and a computer are

connected with a USB

cable.

Acts as left click while the

projector and a computer are

connected with a USB

cable.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC SE20 in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sanyo PLC SE20

Sanyo PLC SE20 User Manual - German - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sanyo PLC SE20 Manual

Product: