598874
63
Zoom out
Zoom in
Previous page
1/98
Next page
Note:
•FactorydefaultisOFF: 5 Min.
•WhentheshutterisclosedwhilethePowermanagement
functionisworking,thePowermanagementfunctionis
released.
Setting
Timer left before Lamp is off.
Power management
For reducing power consumption as well as maintaining
the lamp life, the Power management function turns off the
projection lamp when the projector is not operated for a
certain period.
Select one of the following options:
Ready 1 ........... When the lamp has been fully cooled
down, the POWER indicator changes
to green blinking. In this condition, the
projection lamp will be turned on if the
input signal is reconnected or any button
on the side control or remote control is
pressed.
Ready 2 ........... When 3 hours have elapsed since power
management has been carried out, the
lamp will turn off and the power will switch
off. The operations during the initial 3
hours are the same as for Ready 1.
Shut down ...... When the lamp has been fully cooled
down, the power will be turned off.
Off ................... Power management function is off.
Timer ............... If the input signal is interrupted and
no button is pressed for more than 30
seconds, the timer display with No signal
appears. It starts the countdown until the
lamp is turned off. Use the Point
▲▼
buttons to set the Timer (1~30 Min).
Power management
When this function is set to On, the projector will be
automatically turned on just by connecting the AC power
cord to the wall outlet.
Note:
Besuretoturnofftheprojectorproperly(see“Turning
OfftheProjector”onpage24).Iftheprojectoristurned
offintheincorrectsequence,theDirectonfunction
doesnotworkproperly.
Direct on
63
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLC HP7000L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC HP7000L in the language / languages: English as an attachment in your email.

The manual is 19,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info