598874

Sanyo PLC HP7000L Manual

19
Zoom out
Zoom in
Previous page
1/98
Next page
Installation
19
Focus adjustment
Set up the projector and project image on the
screen.
1. Adjust the focus to make the center area
sharpest, by using the focus adjustment of the
projector.
When the peripheral focus is out of focus in some
localized areas, proceed to following adjustments.
2. Loosen the Focus Lock Screw of the lens. (Turn
the Focus Lock Screw to counter-clockwise.)
3. Rotate the lens to obtain proper focus on outer
area of the screen.
4. Lock the Focus Lock Screw securely. (Turn the
Focus Lock Screw to clockwise.)
If proper focus is not observed entire screen, repeat
above adjustment 1~ 4.
Focus correction
LNS-W34
When the lens is attached to the projector and
images are being projected onto the screen, the
peripheral focus may be out of focus in some
localized areas. If this happens, insert the one,
of three sizes of spacers, in between the Lens
Attachment and the lens to adjust the focus.
Inserting the Spacer corrects the distance on the
Lens Adjustment and improves the diagonal focus.
The corrected distance is determined by the
thickness of the used spacers. As a guide, the
distance is adjusted by approximately 30 mm for
each 0.1-mm thickness of the spacers.
There are three types of spacers provided, and
there are four of each spacer type. Use these
spacers to correct the distance as required.
Focus Lock Screw
Spacer "1"
Color; Clear
Thickness; 0.1 mm
Spacer "2"
Color; Black
Thickness; 0.2 mm
Spacer "3"
Color; Cream
Thickness; 0.3 mm
Correction distance
30 mm/for 40-inch
projection
Correction distance
55 mm/for 40-inch
projection
Correction distance
80 mm/for 40-inch
projection
Some parts are not used for installation or
replacement. Keep these parts for later use.
BE SURE TO CHECK FOR SAFETY
After installing or replacing the lens, be sure to
check the following for safety.
1. Check the lens is securely fixed
with the screws.
2. Check no wiring is damaged or
tangled on the gear of the lens
motor or the other mechanical
parts.
3. Check no part is missing, and no
mounting part is loose.
Note:
•Figuresinthismanualmaydifferfromthe
actualproduct.
B
C
D
A
B
C
D
A
Spacer
Lens
Lens Attachment
Screw driver in the lens
D
B
C
A
Distance
Screen
40-inch projection
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLC HP7000L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC HP7000L in the language / languages: English as an attachment in your email.

The manual is 19,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info