598874
11
Zoom out
Zoom in
Previous page
1/98
Next page
Part Names and Functions
Rear Terminal
11
R/C JACK
When using the wired remote control, connect
the wired remote control to this jack with a
remote control cable (not supplied) (p.15).
USB CONNECTOR (Series B)
Use this connector when controlling a computer
with the remote control of the projector. Connect
the USB terminal of your computer to this
connector with a USB cable (p.20).
CONTROL PORT CONNECTOR
When controlling the projector with RS-232C,
connect the control equipment to this connector
with the serial control cable (p.20).
HDMI TERMINAL
Connect the HDMI signal from video equipment
or the DVI signal from computer to this terminal
(pp.20, 21).
is registered trademarks of HDMI Licensing, LLC.
COMPUTER INPUT TERMINAL (ANALOG)
Connect the computer (or RGB scart) output
signal to this terminal (pp.
20, 21
).
COMPUTER INPUT TERMINAL (DIGITAL)
Connect the computer output digital signal to
this terminal. The HDTV (HDCP compatible)
signal can also be connected (pp.
20, 21
).
VIDEO INPUT JACK
Connect the component or the composite video
output signal from video equipment to these
jacks (p.21).
MONITOR OUT TERMINAL
This terminal can be used to output the
incoming analog RGB signal from INPUT 1-3
terminal to the other monitor (pp.
20, 21
).
5 BNC INPUT JACKS
Connect the component or composite video
output signal from video equipment to VIDEO/Y,
Pb/Cb, and Pr/Cr jacks or connect the computer
output signal (5 BNC Type [Green, Blue, Red,
Horiz. Sync, and Vert. Sync.]) to G, B, R, H/V,
and V jacks (pp.
20, 21
).
S-VIDEO INPUT JACK
Connect the S-VIDEO output signal from video
equipment to this jack (p.21).
Kensington Security Slot
This slot is for a Kensington lock used to deter
theft of the projector.
*Kensington is a registered trademark of ACCO
Brands Corporation.
LAN CONNECTION TERMINAL
Connect the LAN cable (refer to the owners
manual of “Network Set-up and Operation”).
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLC HP7000L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC HP7000L in the language / languages: English as an attachment in your email.

The manual is 19,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info