569872
25
Zoom out
Zoom in
Previous page
1/78
Next page
25
Press the ON/STAND-BY button on the top control
or the STAND-BY button on the remote control, and
“Power off?” appears on the screen.
Press the ON/STAND-BY button or the STAND-BY button
on the remote control again to turn off the projector.
The LAMP indicator turns off and the POWER indicator
starts to blink green. After the projector is turned off,
the cooling fans operates for 90 seconds. During the
POWER indicator is blinking, you cannot turn on the
projector.
1
2
TO MAINTAIN LIFE OF THE LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
DO NOT UNPLUG THE AC POWER CORD WHILE
THE COOLING FANS ARE RUNNING OR BEFORE
THE POWER INDICATOR STOPS BLINKING.
OTHERWISE IT WILL RESULT IN SHORTENING
THE LAMP LIFE.
3
When the projector has cooled down enough, the
POWER indicator stops blinking and you can turn
on the projector. After it is cooled down completely,
unplug the AC power cord.
“Power off?” disappears after 4 seconds.
Note:
•WhentheOnstartfunctionissettoOn,”the
projectorwillbeturnedonautomaticallyby
connectingtheACpowercordtoanACoutlet(p.53).
•Therunningspeedofcoolingfansischanged
accordingtothetemperatureinsidetheprojector.
•Donotputtheprojectorinacasebeforethe
projectoriscooledenough.
•IftheWARNINGTEMP.indicatorblinksorallthe
fiveindicatorsonthetoppanelblink,see“Warning
Indicators”onpage61.
•WhilethePOWERindicatorisblinking,thelamp
isbeingcooleddownandtheprojectorcannotbe
turnedon.WaituntilthePOWERindicatorstops
blinkingtoturnontheprojectoragain.
Turning Off the Projector
DO NOT OPERATE THE PROJECTOR
CONTINUOUSLY WITHOUT REST. CONTINUOUS
USE MAY RESULT IN SHORTENING THE LAMP
LIFE. TURN OFF THE PROJECTOR AND LET
STAND FOR ABOUT AN HOUR IN EVERY 24
HOURS.
Basic Operation
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLC-ET30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC-ET30 in the language / languages: English as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sanyo PLC-ET30

Sanyo PLC-ET30 User Manual - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info