VIDEOBETRIEBSART
44
EINSTELLEN DER VIDEOBETRIEBSART
Direkte Einstellung
Stellen Sie durch Drücken der MODE-Taste des Projektors oder
der VIDEO-Taste der Fernbedienung den Eingang Video 1 oder
Video 2 ein.
Die Anzeige “Video 1” oder “Video 2” erscheint für einige
Sekunden auf dem Bildschirm.
Einstellung mit Hilfe des Menüs
Computer 1
Computer 2
Video 1
Video 1
Video 2
Video 2
MODE-Taste VIDEO-Taste
Drücken Sie die MENU-Taste, um das Bildschirmmenü
anzuzeigen. Stellen Sie den Zeiger mit den Zeigertasten
links/rechts auf das Symbol Computer und drücken Sie die
Einstelltaste (Rückseitenklicktaste). Eine andere Dialogbox mit
dem VIDEO-Menü erscheint.
Drücken Sie die Zeigertaste ab, so daß ein roter Pfeil erscheint.
Stellen Sie diesen Pfeil entweder auf “Video 1” oder “Video 2”
und drücken Sie die Einstelltaste (Rückseitenklicktaste).
1
2
Dieser Projektor erfaßt ein an der bzw. den
Videoeingangsbuchse(n) oder der S-VIDEO-Eingangsbuchse
anliegendes Signal automatisch. Wenn an beiden Buchsen ein
Signal anliegt, kann die Videoquelle mit dem VIDEO-QUELLE-
Menü eingestellt werden.
Drücken Sie die MENU-Taste, um das Bildschirmmenü
anzuzeigen. Stellen Sie mit der Zeigertaste links/rechts “VIDEO-
QUELLE” ein und drücken Sie die Einstelltaste
(Rückseitenklicktaste), so daß das VIDEO-QUELLE-Menü
aufgeklappt wird.
Drücken Sie die Zeigertaste ab, so daß ein roter Pfeil erscheint.
Stellen Sie den Pfeil auf die einzustellende Videoquelle und
drücken Sie die Einstelltaste (Rückseitenklicktaste).
1
2
EINSTELLEN DER VIDEOQUELLE
In dieser Box wird die eingestellte
Videoquelle angezeigt.
Falls ein Composite-Videoausgang von einem an der Buchse
VIDEO/Y angeschlossenen Videogerät anliegt, muß im Menü
VIDEO-QUELLE “Video” eingestellt werden.
Video
Falls ein separater Y/C-Videoausgang von einem an den Buchsen
VIDEO/Y und C angeschlossenen Videogerät anliegt, muß im Menü
VIDEO-QUELLE “Y, C” eingestellt werden.
Y, C
Falls ein Komponenten-Videoausgang von einem an den Buchsen
VIDEO/Y, C/Cb (B-Y) und Cr (R-Y) angeschlossenen Videogerät
anliegt, muß im Menü VIDEO-QUELLE “Y, Cb, Cr” eingestellt
werden.
Y, Cb, Cr