569896
48
Zoom out
Zoom in
Previous page
1/52
Next page
CUIDADO Y LIMPIEZA DEL FILTRO DE AIRE
El filtro de aire desmontable impide que el polvo se acumule sobre la superficie de la lente de proyección y el espejo de
urovección. Si el filtro de aire se tapara, se reducirá la efectividad del ventilador de enfriamiento y podría resultar en
.
_
recalentamiento lo cual reducirá la vida útil de proyector.
Para limpiar el filtro de aire, siga el procedimiento de limpieza indicado a
continuación:
1. Presione el botón
ON
-
OFF para apagar el proyector.
2. Desmonte la cubierta del filtro de aire.
3. Desmonte el filtro de aire y la esponja de la cubierta del filtro.
4. Limpie el filtro de aire con una aspiradora.
5. Vuelva a colocar el filtro de aire y la esponja. Asegúrese que la cubierta
del filtro de aire queda bien colocada.
:’
/;
I’
î
+:.
a
No lo lave. De lo contrario se podría dañar el filtro.
:“
‘,
No haga funcionar el proyector sin el filtro.
,,
PARA DISFRUTAR DE
IMAGENES
DE BUENA CALIDAD, USE EL
PROYECTOR EN UN LUGAR LIMPIO. SE RECOMIENDA USAR EL
APARATO EN UN LUGAR LIMPIO.
Al usarlo en lugares con polvo o humo, se podría acumular el polvo en la
pantalla de cristal líquido y el interior del objetivo y la imagen proyectada
se podría ver con manchas o borrosa.
Cuando ocurran estos problemas, consulte a un distribuidor autorizado o
un centro de servicio para que lo limpien.
A DEL
FILTRO DE AIRE
FILTRO DE
(INDICADORES DE CAMBIO DE LA LÁMPARA Y ADVERTENCIA DE TEMPERATURA)
Cuando la lámpara está llegando al final de su vida útil, la calidad de la imagen y el color se deterioran y el indicador de
cambio de lámpara se enciende de color naranja.
,,’
,.
.:
,;$,;;.’
1.’
“‘í
“’
A
w
/.
NO INTENTE DESMONTAR 0 CAMBIAR LA LÁMPARA DEL PROYECTOR. ESTA LÁMPARA SOLO DEBE
;:,
SER CAMBIADA POR PERSONAL DE SERVICIO CALIFICADO.
El indicador de advertencia de temperatura destella de rojo cuando la
temperatura interna del proyector excede la temperatura normal.
Las razones por las cuales se puede destellar el indicador son:
1. Las salidas de ventilación del proyector pueden estar tapadas. En ese caso,
coloque el proyector en otro lugar de manera que las salidas de ventilación
no queden obstruidas.
2. El filtro de aire está tapado de polvo. Limpie el polvo del filtro de aire de
acuerdo con las instrucciones en la sección anterior Cuidado y limpieza del
filtro de aire.
3. Si el indicador de advertencia de temperatura permanece encendido después
de seguir los pasos anteriores, los circuitos de ventilación/internos. Consulte
en un distribuidor autorizado o un centro de servicio.
INDICADOR DE
ADVERTENCIA DE
TEMPERATURA
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLC 9000E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC 9000E in the language / languages: Spanish as an attachment in your email.

The manual is 4,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sanyo PLC 9000E

Sanyo PLC 9000E User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info