569895
31
Zoom out
Zoom in
Previous page
1/44
Next page
PC ADJUSTMENT
This projector can automatically detect most display signals from most personal computers currently distributed.
However, some computers employ a special signal format which is different from the standard one and may not be
detected by this projector. If this happens, the projector cannot reproduce a proper image. Instead the image is often
recognized
as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.
For those non-standard formats, this projector is provided with PC ADJUST, enabling you to precisely adjust several
parameters to match with the input signal format. The projector has eight independent memory areas where you can
store the parameter you have set. This enables you to recall the setting for a specific computer when you need it.
1.
Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT
BUTTON(s)
to select PC ADJUST and press the SELECT (REAR CLICK)
BUTTON. Another dialog box
Where to reserve” will appear.
3. In this dialog box, you will select one of the memory areas from among “Mode 1” to “Mode 8”. If parameters have
been previously set and stored in the memory, the status “Stored” will appear on the corresponding row. If not,
“Free” will appear.
4. Press the POINT DOWN BUTTON and a red arrow will appear.
5. Move the arrow to one of the “Modes” (Free position) where you want to store the parameters by pressing the
POINT UP/DOWN
BUTTON(s).
Press the SELECT (REAR CLICK)
BUTTON
toselect
it.
NOTE; If “Stored” appears in all Modes, no new PC parameter data can be stored. In this case, clear the PC
parameter data using the Mode free Function.
MAIN MENU DISPLAY
-3l-
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLC 8815E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC 8815E in the language / languages: English as an attachment in your email.

The manual is 4,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sanyo PLC 8815E

Sanyo PLC 8815E User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info