569893
34
Zoom out
Zoom in
Previous page
1/52
Next page
COMPUTER SYSTEM SELECT (COMPUTER MODE)
This projector is adjustable to different types of computer display signals based on VGA, SVGA, XGA or SXGA (See
“COMPATIBLE COMPUTER SPECIFICATIONS’ on the next page). If you set MODE SELECT to “COMPUTER”, the
projector will automatically process the incoming signal and project the proper image without any special setting.
Although this will work in most cases, you may be required to manually set the projector for some computer signals. If
the computer image is not reproduced properly, try the following procedure and switch to the computer display mode
that you want to use.
1. Connect the COMPUTER and the PROJECTOR, and turn them on.
2. Set MODE SELECT to “COMPUTER MODE (1 or 2)
“.
This shows the current display mode initially detected by the
projector in the system window. And “Current mode” display appears.
NOTE:
1.
If the projector cannot discriminate or detect the input signal from the computer, the “Go PC
adj.”
display
appears.
NOTE: 2. If no input signal from the computer, the “No signal” display appears on the screen.
3. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
4. Press the POINT LEFT/RIGHT BUTTON(s) to select SYSTEM and press the SELECT (REAR CLICK) BUTTON.
Another dialog box COMPUTER SYSTEM DISPLAY will appear.
5. Press the POINT DOWN BUTTON and a red arrow will appear.
6. If you want to change the current display mode, move the arrow by pressing the POINT UP/DOWN BUTTON(s) to
select one of the modes.
7. Press the SELECT (REAR CLICK) BUTTON to change the display mode.
8. To quit the MENU, move the arrow to Quit and then press the SELECT (REAR CLICK) BUTTON.
MAIN MENU DISPLAY
COMPUTER
SYSTEM
DISPLAY
VGA4
CURRENT MODE
DISPLAY
When the mark
(S
)
is displayed as BLACK,
computer system mode will be available on the
next page. Move an arrow to the mark
(S
)
and press the SELECT (REAR CLICK)
BUTTON to show computer system mode
described on the next page.
SIMPLE METHOD
1.
Press the SYSTEM BUTTON. COMPUTER SYSTEM
DlSPlAY
dialog box will appear.
2. Press the POINT DOWN BUTTON and a red arrow will appear.
3. If you want to change the current display mode, move the arrow by pressing the POINT UP/DOWN BUTTON(s) to
select one of the modes.
4. Press the SELECT (REAR CLICK) BUTTON to change the display mode.
5. To quit the MENU, move the arrow to Quit and then press the SELECT (REAR CLICK) BUTTON.
PC ADJUSTMENT
This is a special function that may be used when a computer image is not reproduced properly. (See the pages 38
-
41 for more detail.)
-
34
-
i
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLC-8810E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC-8810E in the language / languages: English as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sanyo PLC-8810E

Sanyo PLC-8810E User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info