569893
10
Zoom out
Zoom in
Previous page
1/52
Next page
r
CONNECTING THE PROJECTOR
Your projector is equipped with various audio/video inputs and outputs including Computer
HDB15pin
(VGA) terminals,
Monitor
HDBl5-pin
(VGA) terminals and S-VHS video
.
CONNECTING THE COMPUTER
CONNECTING TO THE COMPUTER INPUT
HDB15-PIN
(VGA) TERMINALS (1 and 2)
Personal computers can be connected to the
HDBl5pin
(VGA) terminal on the projector.
l
Connect the computer to these terminals using the VGA cable and
VGA/MAC
adapter (provided).
CONNECTING TO THE MONITOR OUTPUT
HDBl5-PIN
(VGA) TERMINAL
This terminal contain the information that is viewed on the screen.
Monitor can be connected to the
HDBl
5pin
(VGA) terminal on the projector.
l
Connect the monitor to this terminal using the monitor cable (not provided).
Pin
NoJSignal
Red input
Green input
Blue input
Sense 2
Ground (Horiz. sync.)
Ground (Red)
Ground (Green)
Ground (Blue)
Pin
NoJSignal
9 Non Connect
10 Ground
(Vet?.
sync.)
11
Sense
0
12
Sense
1
13 Horiz. sync.
14 Vet-t. sync.
15 Reserved
HDB15PIN
00000
TERMINAL
CONNECTING TO THE COMPUTER AUDIO INPUT JACKS (1 and 2)
. Connect audio outputs from your computer to these jacks using the audio cable (not provided).
CONNECTING TO THE MULTI-POLE 12-PIN (CONTROL PORT) CONNECTORS (1 and 2)
l If vou wish to control the computer with projector’s remote control unit, you must connect control port
(PW2,
Serial or
-
ADB
port) on your con
iputer
to projector’s control port with cable.
(thr
-ee
type cables provided)
n
CONTROL PORT
52
74
PSI2
Serial
ADB
Port
Port
Port
1
TxD
2 CLK ADB
3 DATA
a
5
%
RxD
6
7
READY
6
9
GND
GND
GND
10
CONTROL PORT CABLE
REMOVAL HINT
Disconnect control port cable
with following steps.
1.
Hold the portion (A) of the
connector with one hand.
1
B
2. Pull the portion (B) arrow
-I
4
direction and remove
L
connector.
%
NOTE: The
RxD
port (5 pin on the Serial Port) is provided on control port 2 connector only. If you control the projector
by computer, you must connect control port 2 connector.
-lO-
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PLC-8810E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PLC-8810E in the language / languages: English as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sanyo PLC-8810E

Sanyo PLC-8810E User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info