489561
133
Zoom out
Zoom in
Previous page
1/135
Next page
124
9. Troubleshooting Check List
Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by referring
to the Troubleshooting section on page 102 of your user’s manual. This checklist below will help us solve your problem
more efficiently.
Frequency of Occurrence always sometimes (How often?________) other (________)
Power
No power (POWER indicator does not light green) See also “Status Indica-
tor (WARNING)”.
Power cable's plug is fully inserted into the wall outlet.
Main power switch is pressed to the ON position.
Lamp cover is installed correctly.
Lamp Time (lamp operation hours) was cleared after lamp replacement.
Shut down during operation.
Power cable's plug is fully inserted into the wall outlet.
Lamp cover is installed correctly.
Power Management is turned off.
Video and Audio
No image is displayed from your PC or video equipment to the projector.
Still no image even though you connect the projector to the PC first,
then start the PC.
Enabling your notebook PC’s signal output to the projector.
A combination of function keys will enable/disable the external display.
Usually, the combination of the “Fn” key along with one of the 12 func-
tion keys turns the external display on or off.
No image (blue background, logo, no display).
Still no image even though you press the AUTO PC ADJ. button.
Still no image even though you carry out [Reset] in the projector’s
menu.
Signal cable's plug is fully inserted into the input connector
A message appears on the screen.
( __________________________________ )
The source connected to the projector is active and available.
Still no image even though you adjust the brightness and/or the con-
trast.
Input source's resolution and frequency are
supported by the projector.
Image is too dark.
Remains unchanged even though you adjust the brightness and/or the
contrast.
Image is distorted.
Image appears to be trapezoidal (unchanged even though you carry out
the [Keystone] adjustment).
Parts of the image are lost.
Still unchanged even though you press the AUTO PC ADJ. button.
Still unchanged even though you carry out [Reset] in the projector’s
menu.
Image is shifted in the vertical or horizontal direction.
Horizontal and vertical positions are correctly adjusted on a computer
signal.
Input source's resolution and frequency are supported by the projector.
Some pixels are lost.
Image is flickering.
Still unchanged even though you press the AUTO PC ADJ. button.
Still unchanged even though you carry out [Reset] in the projector’s
menu.
Image shows flickering or color drift on a computer signal.
Image appears blurry or out of focus.
Still unchanged even though you checked the signal’s resolution on PC
and changed it to projector’s native resolution.
Still unchanged even though you adjusted the focus.
No sound.
Audio cable is correctly connected to the audio input of the projector.
Still unchanged even though you adjusted the volume level.
AUDIO OUT is connected to your audio equipment.
Other
Remote control does not work.
No obstacles between the sensor of the projector
and the remote control.
Projector is placed near a fluorescent light that can
disturb the infrared remote controls.
Batteries are new and are not reversed in installa-
tion.
The remote control code conforms to the projector's
code.
Buttons on the projector cabinet do not work.
Control Panel Lock is not turned on or is disabled in
the menu.
Still unchanged even though you press and hold the
CANCEL button for a minimum of 10 seconds.
133


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PDG-DXT10KL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PDG-DXT10KL in the language / languages: English as an attachment in your email.

The manual is 8,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sanyo PDG-DXT10KL

Sanyo PDG-DXT10KL User Manual - German - 135 pages

Sanyo PDG-DXT10KL User Manual - Dutch - 110 pages

Sanyo PDG-DXT10KL User Manual - French - 135 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info