489447
70
Zoom out
Zoom in
Previous page
1/82
Next page
70
Appendix
Problem Solutions Pages
Image
Image is out of focus.
q
Adjust focus of the projector. 25
q
Provide proper distance between the projector and the
projection screen.
15
q
Check the projection window to see if it needs cleaning.
66
q
Moving the projector from a cool to warm place may result in
moisture condensation on the projection lens. In such cases,
leave the projector off and wait until condensation evaporates.
Picture is not bright enough.
q
Check if the Contrast or Brightness is adjusted properly. 37, 44
q
Check if Image mode is selected properly. 36
q
Check the lamp control function. 28, 58
q
Check the LAMP REPLACE indicator. If it lights, the end of
lamp life is approaching. Replace the lamp with a new one
promptly.
67
The color is strange.
q
Check the Input signal, color system, video system or
computer system mode.
q
Make sure the Colorboard is not selected on Screen Menu. 40, 47
The image is distorted or runs
off.
q
Check PC adjustment Menu or Screen and adjust them. 34-35,
38-40
Setting and adjustment
Auto PC adjustment function
does not work.
q
Check the Input signal. Auto PC function can not work when
480p, 575p, 720p, 480i, 575i or 1080i is selected, or when the
digital signal is input into HDMI terminal.
32, 33
Some displays are not seen
during the operation.
q
Check the Display function. 53
The setting does not remain
after turning off power.
q
Make sure you selected Store after adjusting setting. Some
settings can not be stored if not registered with "Store".
37, 45
Power management does not
work.
q
Power management function can not work while Freeze or No
Show is running.
57
Capture function does not
work.
q
Check the connection and the input signal to see if there is
signal
54
Auto setup does not work
properly.
q
Make sure Off is not selected at any function of Auto setup
51
Top control does not work.
q
The top control is not available if the top control is locked at
Key lock under Security of SETTING section.
59
Remote control
The remote control does not
work.
q
Check the batteries.
q
Make sure no obstruction is between the projector and remote
control.
q
Make sure you are not too far from the projector when using
the remote control. Maximum operating range is 16.4'(5 m).
q
Make sure the code of the remote control is conformed to the
projector’s code.
58
q
Unlock the Key lock function for the remote control function. 59
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PDG-DWL2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PDG-DWL2500 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sanyo PDG-DWL2500

Sanyo PDG-DWL2500 User Manual - German - 142 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info