216310
47
Zoom out
Zoom in
Previous page
1/51
Next page
46
English
Appendices
Operation
1. Connect the specied RS-232C control cable to SERVICE PORT on
the projector and serial port on the PC.
2. Launch a communication software provided with PC and setup the
communication condition as follows:
3. Type the command for controlling the projector and then enter the
“Enter” key.
Example
When you want to change the input to Computer, Type ‘C’ ‘0’ ‘5’
‘Enter’.
Serial Control Interface
This projector provides a function to control and monitor the
projector’s operations by using the RS-232C serial port.
Baud rate : 9600 bps
Parity check: : none
Stop bit : 1
Flow control : none
Data bit : 8
The default of the baud rate is set to 9600 bps. If an error occurs in the com-
munication, change the serial port.
Enter with ASCII 64-byte capital characters and one-byte characters.
N
o
t
e
ORDER RS-232C CONTROL CABLE
RS-232C control cable can be ordered through your dealer. When order-
ing, give the following information to the dealer.
Model No. of your projector : PDG-DSU30
RS-232C control cable : Service parts No. CH4200272G002
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo pdg dsu30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo pdg dsu30 in the language / languages: English as an attachment in your email.

The manual is 9,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sanyo pdg dsu30

Sanyo pdg dsu30 User Manual - German - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info