470258
24
Zoom out
Zoom in
Previous page
1/27
Next page
-23-
ELECTRICAL CONNECTIONS
1
Antenna socket
Insert the plug from the antenna installed in your vehicle into this socket. (If your vehicle has a dual
antenna system, a dual antenna to single antenna cable adaptor may be required.)
2
+12V Constant Power Supply (Yellow)
Connect this wire to the +12V power terminal which receives power continuously.
Connect to location drawing 10 A amperage or more.
3
+12V Accessory/Switched (Red)
Connect this wire to the terminal which receives power while the ignition switch is at ON or
ACCESSORY position.
If the ignition switch does not have an ACC position, connect this wire to a +12V
power terminal which receives power continuously. (Same as item 2.)
Connect to location drawing 100 mA amperage or more.
4
Ground wire (Black)
Connect this wire to the vehicle chassis.
5
Power Antenna (Blue/Red)
Connect this wire to the control terminal of a Power Antenna.
When not using a Power Antenna, this wire is not connected.
6
Amplifier Turn On (Blue/White)
Connect this wire to an external amplifier.
When not using an external amplifier, this wire is not connected.
DO NOT connect any speaker wires to the metal body or chassis of the vehicle.
DO NOT connect the speaker common (-) wires to each other.
Connect each speaker wire directly to each speaker terminal.
All speaker common (-) wires must remain floating.
CAUTION
1. ANTENNA SOCKET
ANTENNA PLUG
4-speaker System
(Gray)
(Green)
(Green/Black)
(Violet)
(Violet/Black)
(White)
Front Left
Speaker
Front Right
Speaker
Rear Left
Speaker
Rear Right
Speaker
(White/Black)
(Gray/Black)
2. +12V Constant Power Supply (Yellow)
3. +12V Accessory/Switched (Red)
4. Ground Wire (Black)
5. Power Antenna (Blue/Red)
6. Amplifier Turn On (Blue/White)
Left
Speaker
Right
Speaker
Do Not
Connect
Do Not
Connect
(Gray)
(Green)
(Green/Black)
(Violet)
(Violet/Black)
(White)
(White/Black)
(Gray/Black)
2-speaker System
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo FXCD-550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo FXCD-550 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info