19032
17
Zoom out
Zoom in
Previous page
1/42
Next page
-E16-
VIDEO 1
1, 3
Preparations
Turn on the TV and select the video input source.
DISC PLAYBACK
Important Note:
This instruction manual explains the basic instruction of this
unit using the remote control unit.
Some DVD video discs have different functions that may
not be explained in this instruction manual. You may need
extra instructions. In this case, please follow the instructions
displayed on the TV screen or jacket or case of the disc.
•“ may appear on the TV screen during operation. This
icon means that the function is not available on the disc
now.
For improvement, on-screen displays subject to change
without notice.
Basic Playback
Notes:
Do not touch the disc tray while it is moving.
Never place anything except a disc on the disc tray. Foreign
objects can damage the unit.
Do not apply excessive force to the disc tray.
Discs must be placed on the disc tray one at a time.
When operation buttons are pressed, that operation is displayed
on the TV screen. The display disappears after several seconds.
To use the remote control for TV
Note:
You must set the remote control code for TV first. (See Page
E6.)
1. Press [TV POWER] to turn on the power.
When using the remote control, the Transmitter
Window on the remote control must be pointed toward
your TV.
2. Press [TV/VIDEO] to select the video input source.
3. Set the TV volume minimum.
Notes:
Only remote-controlled TVs can be operated using this
remote control. (Refer to your TV instruction manual for
more details.)
There may be some TV models that cannot be operated
with this remote control. If this is the case, use the
original remote control supplied with the TV.
Select the playback picture size according to the aspect ratio
of the TV. (See Setting Display in INITIAL SETTINGS on
Page E32.)
TV
4:3 LB
(Letterbox):
4:3 PS
(Panscan):
16:9
1. Press [q] on the unit (or [OPEN/CLOSE] on the remote
control).
•“OPEN appears on the FL display and the disc tray
opens.
•“SANYO logo appears on the TV screen.
Note:
To open close the disc tray, be sure to use [q] (or [OPEN/
CLOSE]. Do not press the disc tray with your hand.
2. Place the disc with the label facing up on the disc tray.
For 5-inch (12cm) disc For 3-inch (8cm) disc
or
3. Press [q] (or [OPEN/CLOSE]) again.
The disc tray closes.
•“READING appears on the FL display.
Note:
Some discs may start playback automatically.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo DWM2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo DWM2500 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info