456933
6
Zoom out
Zoom in
Previous page
1/32
Next page
English - 5 -
Before Switching On Your TV
Power Connection
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambi-
ent room temperature before you connect the set to
the mains.
Connections To The Aerial Input Socket
Connect the aerial or cable TV plug to the Aerial input
socket located at the rear of the TV and connect the
cable plug coming out from the TV out socket lo-
cated on the devices (VCR, DVB etc.) to this socket
as well.
VHF/UHF
75
REAR OF THE TV
CABLE TV
Inserting Batteries In The Remote
Control Handset
WARNING : Remote control is battery included. A plas-
tic protector is used to disconnect the batteries in
order to prevent the battery life from reducing. Please
remove the plastic protector before the first use.
Remove the battery cover located on the back of the
handset by gently pulling backwards from the indi-
cated part.
Insert two
AAA/R03 or equivalent type batteries
inside. Place the batteries in the right directions and
replace the battery cover.
Note: Remove the battery from remote control hand-
set when it is not to be used for a long period. Other-
wise it can be damaged due to any leakage of bat-
tery.
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power to
220-240V AC 50 Hz. Press
stand-by button.Then the TV switches itself to
stand-by mode.
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
channel number is selected, or Press the -P/CH or P/
CH+ button on the TV or press the Ch+ or Ch- button
on the remote control, so that last mode switched off
is selected.
By either method the TV will switch on.
To switch the TV off:
Press stand-by button on the remote control or stand-
by button on the TV so the TV will switch to standby
mode. To power down the TV completely, unplug the
power cord from the mains socket.
Navigating the Menu System
M
INFO
OK
SELECT
For displaying
menu options
For navigation
To confirm
choices
1- Press “M” to display the menu.
2- Press
or
button to select an icon. Press
for more options.
3- Use “
” or “
” button to highlight.
4- Press
or
buttons to change the settings.
Press
OK to set as default.
5- To exit the menu or return from sub-menu screen,
press
“M”.
These explanations are available for the navigation
of the whole Menu System. To select options that are
explained in the following parts, refer to “Navigating
The Menu System”.
ENG-37781W-1050UK-37 INCH 17MB22 UK IDTV-(2 HDMI-BASIC PIP-SPDIF)(C2)-50115146.p6503.09.2007, 08:225
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo CES37WSD7-B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo CES37WSD7-B in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info