456934
30
Zoom out
Zoom in
Previous page
1/49
Next page
English -29 -
menu, Common Interface then pressing the
OK button. (CAM set up menu is not
displayed when it is not required.)
To see the viewing contract information: enter
IDTV; press the M button, then highlight
Common Interface and press the OK button.
• When no module is inserted, No Common
Interface module detected message
appears on the screen.
Refer to the module instruction manual for
details of the settings.
Menu System
Picture Menu
Mode Dynamic
Contrast 63
Brightness 63
Sharpness 31
Colour 99
Colour Temp Normal
Noise Reduction Low
Film Mode Off
Store
Reset
PICTURE
NO SIGNAL
Mode
For your viewing requirements, you can set
the related mode option.
Press
or button to select Mode. Press
or button to choose from one of these
options: Cinema, Dynamic and Natural.
Contrast/Brightness/Sharpness/Colour/
Hue
Press or button to select the desired
option. Press
/
button to set the level.
Note: Hue option can only be visible when
the TV receives an NTSC signal.
Colour Temp
Press or button to select Colour Temp.
Press
/
to choose from one of these
options: Cool, Normal and Warm.
Note:
Setting Cool option gives white colours a
slight blue stress.
Setting Warm option gives white colours a
slight red stress.
For normal colours, select Normal option.
Noise Reduction
If the broadcast signal is weak and the picture
is noisy, use Noise Reduction setting to
reduce the noise amount.
Press
or button to select Noise
Reduction. Press
/
to choose from one of
these options: Low, Medium, High or Off.
Film Mode
Films are recorded at a different number of
frames per second to normal television
programmes.
Press
or button to select Film Mode.
Press
/
button to set this feature On or Off.
Turn this feature on when you are watching
films to see the fast motion scenes clearly.
Store
Press or button to select Store. Press
or OK button to store the settings. Stored
will be displayed on the screen.
Reset
Press or button to select Reset. Press
/
or OK button to reset the picture modes to
factory default settings.
ENG-47751W-MB26 UK IDTV-1050UK-(WSUB-ALO-2SCRT)(3D PANORAMA)(ECO PIP)(C2)-50110360.p6506.07.2007, 22:1829
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo CE47FD51-B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo CE47FD51-B in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info