33579
9
Zoom out
Zoom in
Previous page
1/26
Next page
17
16
SET-UP
LNA (Low Noise Amplifier) EFFECTS
Set LNA ON to increase a weak incoming signal. However, if you are located in a strong signal
area, such as nearby a broadcasting station, and if the picture is distorted, set LNA OFF.
1. Press CH
/ buttons or use the number buttons to select a channel you want to adjust.
2. Press MENU button, move the cursor to "SETUP" option and press VOL
+
button. The "SET
UP" menu is displayed.
3. Press CH / buttons to place the cursor on the "LNA" option.
4. Press the VOL+ button.
Whenever this button is pressed, the mode will change as follows.
SETUP
ANTENNA : CATV2
AUTO PROGRAM
FINE TUNE : 0
LNA : OFF
: SEL. + : SET :PREV.
MENU
PICTURE
SOUND
TIME
SETUP
FUNCTION
LANGUAGE : ENGLISH
: SEL. + : ENTER :EXIT
SETUP
ANTENNA : CATV2
AUTO PROGRAM
FINE TUNE : 0
LNA : OFF
: SEL. + : SET :PREV.
SETUP
ANTENNA : CATV2
AUTO PROGRAM
FINE TUNE : 0
LNA : ON
: SEL. + : SET :PREV.
SET-UP
FINE TUNING
If the reception is clear, you do not have to fine-tune the channel, because this is done
automatically during auto program and manual memory.
If, however, the signal is weak or distorted, you may have to fine-tune the channel manually.
1. Press CH
/ buttons or use the number buttons to select a channel you want to adjust.
2. Press MENU button, move the cursor to "SETUP" option and press VOL
+
button. The "SET
UP" menu is displayed.
3. Press CH / buttons to place the cursor on the "FINE TUNE" option.
4. Use VOL
+
/
-
buttons until you obtain a sharp and clear picture and good sound quality.
5. If you wish to memorize the fine-tuned frequency for the channel, press ADD/DEL button. The
[ ] symbol (red color) appears to the right of the channel number. To delete the memory,
press the same button again. The [ ] symbol disappears.
NOTES The AFT (Automatic Fine Tuning) mode does not operate on the channels that are
fine-tuned.
After the Auto Channel Programming has been performed, memorized channels
are automatically tuned to their optimum frequencies.
SETUP
ANTENNA : CATV2
AUTO PROGRAM
FINE TUNE : 0
LNA : ON
A/D: MEMORY
: SEL. : ADJ :PREV.
MENU
PICTURE
SOUND
TIME
SET UP
FUNCTION
LANGUAGE : ENGLISH
: SEL. + : ENTER :EXIT
SETUP
ANTENNA : CATV2
AUTO PROGRAM
FINE TUNE : 0
LNA : ON
A/D: MEMORY
: SEL. : ADJ :PREV.
SETUP
ANTENNA : CATV2
AUTO PROGRAM
FINE TUNE : +2
LNA : ON
A/D: MEMORY
: SEL. + : ADJ :PREV.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo AVM32F4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo AVM32F4 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info