33575
13
Zoom out
Zoom in
Previous page
1/40
Next page
13
R L
R
L
R L
S-VIDEO IN -1
AUDIO
VIDEO
INPUT
1
VIDEO
(MONO)
S-VIDEO IN -2
AUDIO
VIDEO
INPUT
2
AUDIO
(MONO)
VIDEO
AUDIO
AUDIO
OUTPUT
UHF/VHF/CATV
75
Back of TV
MODEL AVM-3680G
Stereo Amplifier
USING THE AUDIO OUTPUT JACKS
CONNECTING A STEREO AMPLIFIER TO AUDIO OUT JACKS
1. Connect the TV Audio Output (R/L)
to the Stereo Amplifier In (R/L)
.
2. Press POWER on remote control to turn on the TV. Turn on external equipment also.
QuickTips
Position your TV at
least 2 feet from
stereo speakers. The
magnets in the speak-
ers may affect the
picture quality.
DO NOT connect
external speakers
directly to the TV.
Always match cables
according to the
colors;
RED for right
audio,
WHITE for left
audio and
YELLOW for
video.
Make sure all cable
connectors are fully
seated on the jacks.
Make sure you select
TV channel to match
your VCR output
(Ch. 3 or 4). See
chart on page 15.
To view two TV
programs or watch a
TV program and pre-
recorded tape at the
same time follow
steps on page 14.
If you are connect-
ing your TV to a
satellite dish, you
must have two (2)
receivers or use a
cable system or
antenna with the
satellite to use the
PIP feature.
USING THE AUDIO/VIDEO INPUT JACKS
FOR PIP
The PIP feature requires two signals to work: You must connect signals to the 75 ohm
terminal and to one set of the A/V jacks; or you must
connect signals to both sets of A/V jacks.
CONNECTING A SATELLITE SYSTEM AND CABLE
1. Connect signal (cable or antenna) to the TV 75 (ohm) terminal
.
2. Connect Satellite S-Video Out to TV S-Video In jack.
Using the S-Video In 1 jack overrides the Video1 Input jack and the S-Video In 2 jack
overrides the Video2 In jack (Model AVM-3680G).
3. Connect the Satellite Audio Out (R/L) jacks to TV Audio Input (R/L) jacks.
Press POWER key to turn on the TV. Turn on external equipment also.
UHF/VHF/CATV
75
AUDIO VIDEO
(MONO)
R
L
LR
AUDIO
VIDEO
(MONO)
LR
S-VIDEO IN -1
AUDIO
VIDEO
INPUT
1
S-VIDEO IN -2
AUDIO
VIDEO
INPUT
2
AUDIO
OUTPUT
IN FROM
SAT.
CATV IN
OUT TO TV S-VIDEO
CH3
CH4
R- -LAUDIOVIDEO
R- -LAUDIOVIDEO
Back of
Satellite
Receiver
Back of TV
(MODEL AVM-3680G)
Cable or Antenna
system
(See page 4.)
R L
R
L
R L
S-VIDEO IN -1
AUDIO
VIDEO
INPUT
1
VIDEO
(MONO)
S-VIDEO IN -2
AUDIO
VIDEO
INPUT
2
AUDIO
(MONO)
VIDEO
AUDIO
AUDIO
OUTPUT
UHF/VHF/CATV
75
Back of TV
MODEL AVM-3680G
Stereo Amplifier
USING THE AUDIO OUTPUT JACKS
CONNECTING A STEREO AMPLIFIER TO AUDIO OUT JACKS
1. Connect the TV Audio Output (R/L)
to the Stereo Amplifier In (R/L)
.
2. Press POWER on remote control to turn on the TV. Turn on external equipment also.
QuickTips
Position your TV at
least 2 feet from
stereo speakers. The
magnets in the speak-
ers may affect the
picture quality.
DO NOT connect
external speakers
directly to the TV.
Always match cables
according to the
colors;
RED for right
audio,
WHITE for left
audio and
YELLOW for
video.
Make sure all cable
connectors are fully
seated on the jacks.
Make sure you select
TV channel to match
your VCR output
(Ch. 3 or 4). See
chart on page 15.
To view two TV
programs or watch a
TV d
USING THE AUDIO/VIDEO INPUT JACKS
FOR PIP
The PIP feature requires two signals to work: You must connect signals to the 75 ohm
terminal and to one set of the A/V jacks; or you must
connect signals to both sets of A/V jacks.
CONNECTING A SATELLITE SYSTEM AND CABLE
1. Connect signal (cable or antenna) to the TV 75 (ohm) terminal
.
2. Connect Satellite S-Video Out to TV S-Video In jack.
Using the S-Video In 1 jack overrides the Video1 Input jack and the S-Video In 2 jack
overrides the Video2 In jack (Model AVM-3680G).
3. Connect the Satellite Audio Out (R/L) jacks to TV Audio Input (R/L) jacks.
Press POWER key to turn on the TV Turn on external equipment also
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo AVM3280G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo AVM3280G in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info