33569
11
Zoom out
Zoom in
Previous page
1/56
Next page
11
USING THE AUDIO/VIDEO INPUT JACKS
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables.
1. Connect VCR, DVD, DSS, or other equipment’s Audio Out (R/L) to the TV Audio
Input (R/L)
.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
2. Connect VCR, DVD, DSS, or other equipment’s Video Out to the TV Video Input
.
Optional
Connect VCR, DVD, DSS, or other equipment’s S-Video Out to the TV S-Video In Jack .
Using the S-Video In jack overrides the Video 1 jack
.
3. Press POWER to turn on the TV. See
. Turn on external equipment also.
4. Press the VIDEO MODE key
to select program source: TV signal or signal from the
equipment you have connected to the A/V1 and A/V2 jacks. See page 6 for remote control
operation
.
Follow the same procedure to connect other compatible video equipment to the second set
of A/V jacks.
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors;
RED for right
audio,
WHITE for left
audio and
YELLOW
for video.
A/V1 and A/V2 jacks
have identical func-
tions. Any
compatible video
equipment can be
connected to either
set of jacks.
A solid Blue screen
with the word
Video1 or Video2
displayed means
that the Video mode
is selected, but no
signal is being
detected at the
Video jack. Check
connection, and
turn on external
equipment.
Make sure you select
TV channel to match
your VCR output
(Ch. 3 or 4).
You may be able
to use the remote
control to operate
your VCR, Cable
Box and TV.
(See page 7.)
UHF/VHF/CATV
75
AUDIO VIDEO
(MONO)
R
L
LR
AUDIO VIDEO
(MONO)
LR
S-VIDEO
AUDIO
VIDEO
INPUT
1
AUDIO
VIDEO
INPUT
2
AUDIO
OUTPUT
CH3 CH4
IN
OUT
A/V JACKS
RF
CHANNEL
R- -L
AUDIO VIDEO
R- -LAUDIO VIDEO
Back View
of a VCR
1
2 3
RESET
VIDEO
MODE
POWER
CABLEVCR TV
Remote Control
TV A/V Input
Rear Jacks
DVD Player
USING THE AUDIO/VIDEO INPUT JACKS
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables.
1. Connect VCR, DVD, DSS, or other equipment’s Audio Out (R/L) to the TV Audio
Input (R/L)
.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
2. Connect VCR, DVD, DSS, or other equipment’s Video Out to the TV Video Input
.
Optional
Connect VCR, DVD, DSS, or other equipment’s S-Video Out to the TV S-Video In Jack .
Using the S-Video In jack overrides the Video 1 jack
.
3. Press POWER to turn on the TV. See
. Turn on external equipment also.
4. Press the VIDEO MODE key
to select program source: TV signal or signal from the
equipment you have connected to the A/V1 and A/V2 jacks. See page 6 for remote control
operation
.
Follow the same procedure to connect other compatible video equipment to the second set
of A/V jacks.
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors;
RED for right
audio,
WHITE for left
audio and
YELLOW
for video.
A/V1 and A/V2 jacks
have identical func-
tions. Any
compatible video
equipment can be
connected to either
set of jacks.
A solid Blue screen
with the word
Video1 or Video2
displayed means
that the Video mode
is selected, but no
signal is being
detected at the
Video jack. Check
connection, and
turn on external
CH3 CH4
IN
OUT
A/V JACKS
RF
CHANNEL
R- -L
AUDIO VIDEO
R- -LAUDIO VIDEO
Back View
of a VCR
1
2 3
RESET
VIDEO
MODE
POWER
CABLEVCR TV
Remote Control
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo AVM3259S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo AVM3259S in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info