33537
10
Zoom out
Zoom in
Previous page
1/48
Next page
10
USING THE AUDIO/VIDEO INPUT JACKS
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables.
1. Connect VCR or other equipment’s Audio Out (R/L) to the TV Audio Input (R/L)
.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV
Audio (L) In.
2. Connect VCR or other equipment’s Video Out to the TV Video In
.
3. Press POWER to turn on the TV. See
. Turn on external equipment also.
4. Press the VIDEO MODE key
to select program source: TV signal or signal
from the equipment you have connected to the A/V jacks. See page 6 for remote control
operation
.
UHF/VHF/CATV
75
AUDIO VIDEO INPUT
R
AUDIO
VIDEO
(MONO)
L
R
L
AUDIO
OUTPUT
CH3 CH4
IN
OUT
A/V JACKS
RF
CHANNEL
R- -L
AUDIO VIDEO
R- -LAUDIO VIDEO
Back View of VCR
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors;
RED for right
audio,
WHITE for left
audio and
YELLOW
for video.
A solid Blue screen
with the words
Video displayed
means that the Video
mode is selected, but
no signal is being
detected at the Video
jack.
Position your TV at
least 2 feet from
stereo speakers.
The magnets in the
speakers may affect
the picture quality.
special precautions.
DO NOT connect
external speakers
directly to the TV.
USING THE AUDIO OUTPUT JACKS
CONNECTING A STEREO AMPLIFIER TO AUDIO OUT JACKS
1. Connect the TV Audio Out (R/L)
to the Stereo Amplifier In (R/L)
.
2. Press POWER on remote control (see
above) to turn on the TV. Turn on external
equipment also.
UHF/VHF/CATV
75
AUDIO VIDEO INPUT
R
AUDIO
VIDEO
(MONO)
L
R
L
AUDIO
OUTPUT
TV A/V Input
Rear Jacks
Back of TV
Stereo Amplifier
1
4 5
2 3
6
RESET
VIDEO
MODE
POWER
CABLEVCR TV
Remote Control
USING THE AUDIO/VIDEO INPUT JACKS
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables.
1. Connect VCR or other equipment’s Audio Out (R/L) to the TV Audio Input (R/L)
.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV
Audio (L) In.
2. Connect VCR or other equipment’s Video Out to the TV Video In
.
3. Press POWER to turn on the TV. See
. Turn on external equipment also.
4. Press the VIDEO MODE key
to select program source: TV signal or signal
from the equipment you have connected to the A/V jacks. See page 6 for remote control
operation
.
UHF/VHF/CATV
75
AUDIO VIDEO INPUT
R
AUDIO
VIDEO
(MONO)
L
R
L
AUDIO
OUTPUT
CH3 CH4
IN
OUT
A/V JACKS
RF
CHANNEL
R- -L
AUDIO VIDEO
R- -LAUDIO VIDEO
Back View of VCR
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors;
RED for right
audio,
WHITE for left
audio and
YELLOW
for video.
A solid Blue screen
with the words
Video displayed
means that the Video
mode is selected, but
no signal is being
detected at the Video
jack.
Position your TV at
least 2 feet from
stereo speakers.
The magnets in the
speakers may affect
the picture quality.
special precautions.
DO NOT connect
external speakers
di l h TV
USING THE AUDIO OUTPUT JACKS
TV A/V Input
Rear Jacks
1
4 5
2 3
6
RESET
VIDEO
MODE
POWER
CABLEVCR TV
Remote Control
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo AVM2760S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo AVM2760S in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info