Manual Sanus Systems SD103 (page 12 of 24) (English, German, Dutch, Danish, French, Italian, Spanish)

48899

Zoom out

Zoom in

1/24

Step 4: Attach the Monitor Mount to a Monitor with a Curved Back or Obstructions

Attach the Monitor Mount [B] to the back of your LCD monitor using the M4 x 30 mm Screws

[F] and the Spacers [G], as shown in Figure 4. Position the Monitor Mount so that the large side

of the tapered hole faces the bottom of the monitor. Place the four screws through the Monitor

Mount and the spacers, and then into the VESA bolt mounting pattern on the back of the monitor.

Tighten the bolts to the monitor.

Paso 4: Sujete el soporte del monitor a un monitor con dorso curvo u obstrucciones

Sujete el soporte del monitor [B] al dorso de su monitor de LCD usando los tornillos M4 x 30 mm

[F] y los separadores [G], como se indica en la ﬁgura 4. Coloque el soporte del monitor de tal

manera que el lado largo del oriﬁcio cónico quede frente a la base del monitor. Introduzca los

cuatro tornillos, a través del soporte del monitor y los separadores, en el patrón de montaje de

tornillos VESA situado en el dorso del monitor. Apriete los tornillos contra el monitor.

Schritt 4: Monitorhalterung an einem Monitor mit gekrümmter Rückwand oder

Hindernissen anbringen

Monitorhalterung [B] mit den Schrauben M4 x 30 mm [F] und Distanzscheiben [G], wie in Abbildung

4 dargestellt, an der Rückwand Ihres LCD-Monitors anbringen. Monitorhalterung so ausrichten, dass

die große Seite des konischen Lochs zur Monitor-Unterseite weist. Die vier Schrauben durch die

Monitorhalterung und die Distanzscheiben und anschließend in das VESA-Schraubenmontagemuster

an der Rückwand des Monitors einsetzen. Schrauben am Monitor anziehen.

Étape 4 : Fixation de l’applique sur un moniteur ayant une face arrière bombée ou pourvue

d’un obstacle

Fixez l’applique [B] à l’arrière de votre moniteur LCD au moyen des vis M4 x 30 mm [F] et des

douilles d’espacement, comme le montre la ﬁgure 4. Placez l’applique de façon à ce que le côté

large du trou conique de l’applique soit orienté vers le bas du moniteur. Placez les quatre vis dans

les trous de l’applique et dans les trous à la norme de ﬁxation VESA à l’arrière du moniteur. Serrez

les vis dans le moniteur.

Fase 4: Montaggio del supporto monitor a un monitor con dorso curvo od ostruzione

Attaccare il Supporto Monitor [B] al dorso del monitor LCD usando le Viti M4 da 30 mm [F] e

i Distanziatori [G] come mostrato nella Figura 4. Posizionare il supporto monitor in modo che

il lato grande del foro conico sia rivolto verso l’estremità del monitor. Collocare le quattro viti

facendole passare attraverso il supporto monitor e l’attacco VESA di riferimento sul dorso del

monitor. Serrare i bulloni al monitor.

Passo 4: Montagem do Suporte de Monitor em Monitor com parte traseira curva ou com obstruções

Fixe o Suporte de Monitor (C) na parte traseira do seu monitor LCD utilizando os Parafusos M4

x 30 mm [F] e os espaçadores [G], conforme ilustrado na Figura 4. Posicione o suporte de forma

que o buraco maior da abertura cónica esteja virado para baixo. Coloque os quatro parafusos

nos buracos do suporte e no padrão de buracos VESA na parte traseira do monitor. Aperte os

parafusos para ﬁxar o monitor.

[B]

[F]

[G]

6901-210121

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sanus Systems SD103 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sanus Systems SD103 Manual

Product: