48899

Sanus Systems SD103 Manual

10
Zoom out
Zoom in
Previous page
1/24
Next page
10
EN
Step 3: Attach the Monitor Mount to a Monitor with a Flat Back
NOTE: For monitors with curved backs or obstructions, go to Step 4.
Attach the Monitor Mount [B] to the back of your LCD monitor using the M4 x 10 mm Screws [E],
as shown in Figure 3. Position the Monitor Mount so that the large side of the tapered hole faces
the bottom of the monitor. Place the four screws through the Monitor Mount into the VESA bolt
mounting pattern on the back of the monitor. Tighten the screws into the monitor. Go to Step 5.
ES
Paso 3: Sujete el soporte del monitor a un monitor de dorso plano
NOTA: Para monitores de dorso curvo o con obstrucciones, vaya al paso 4.
Sujete el soporte del monitor [B] al dorso de su monitor de LCD usando los tornillos M4 x 10 mm
[E], como se indica en la figura 3. Coloque el soporte del monitor de tal manera que el lado largo
del orificio cónico quede frente a la base del monitor. Introduzca los cuatro tornillos, a través del
soporte del monitor, en el patrón de tornillos VESA del dorso del monitor. Apriete los tornillos
contra el monitor. Vaya al paso 5.
DE
Schritt 3: Monitorhalterung an einem Monitor mit flacher Rückwand anbringen
HINWEIS: Für Monitore mit gekrümmten Rückwänden oder Hindernissen weiter mit Schritt 4..
Monitorhalterung [B] mit den Schrauben M4 x 10 mm [E], wie in Abbildung 3 dargestellt, an der
Rückwand Ihres LCD-Monitors anbringen. Monitorhalterung so ausrichten, dass die große Seite
des konischen Lochs zur Monitor-Unterseite weist. Die vier Schrauben durch die Monitorhalterung
in das VESA-Schraubenmontagemuster an der Rückwand des Monitors einsetzen. Schrauben im
Monitor anziehen. Weiter mit Schritt 5.
FR
Étape 3 : Fixation de l’applique sur un moniteur ayant une face arrière plate
NOTE : Pour les moniteurs ayant une face arrière bombée ou pourvue d’un obstacle, voir l’étape 4.
Fixez l’applique [B] à l’arrière de votre moniteur LCD au moyen des vis M4 x 10 mm [E], comme le
montre la figure 3. Placez l’applique de façon à ce que le côté large du trou conique de l’applique
soit orienté vers le bas du moniteur. Placez les quatre vis dans les trous de l’applique et dans les
trous à la norme de fixation VESA à l’arrière du moniteur. Serrez les vis dans le moniteur. Rendez-
vous à l’étape 5.
IT
Fase 3: Montaggio del supporto monitor a un monitor con dorso piatto
NOTA: Per i monitor con dorso curvo od ostruzione fare riferimento alla Fase 4.
Attaccare il Supporto Monitor [B] al dorso del monitor LCD usando le viti M4 da 10 mm [E] come
mostrato nella Figura 3. Posizionare il supporto monitor in modo che il lato grande del foro conico
sia rivolto verso l’estremità del monitor. Collocare le quattro viti facendole passare attraverso il
supporto monitor e l’attacco VESA di riferimento sul dorso del monitor. Serrare le viti al monitor.
Passare alla Fase 5.
PT
Passo 3: Montagem do Suporte de Monitor em Monitor com parte traseira plana
NOTA: Para monitores com partes traseiras curvas ou com obstruções, por favor siga o Passo 4.
Fixe o Suporte de Monitor [B] na parte traseira do seu monitor LCD utilizando os Parafusos M4 x
10 mm [E], conforme ilustrado na Figura 3. Posicione o suporte de forma que o buraco maior da
abertura cónica esteja virado para baixo. Coloque os quatro parafusos nos buracos do suporte e
no padrão de buracos VESA na parte traseira do monitor. Aperte os parafusos para fixar o monitor.
Siga para o Passo 5.
[E]
[E]
3
[B]
6901-210121
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanus Systems SD103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanus Systems SD103 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info