Manual Sansui SLED4680 (page 15 of 27) (English)

489551

Zoom out

Zoom in

1/27

ENGLISH

Starting setup

The Auto Setup menu appears the first time you

turn on the TV, and assists you to specify the

Air/Cable setting, and program your channels

automatically.

IMPORTANT: Make sure that the antenna or cable

TV system connection is made!

To turn on the TV, press

(POWER)

(POWER

indicator on the front of the unit changes blue. It

may take approx. 10 seconds for a picture to appear

on screen.). The Auto setup function begins.

Automatic Search Start

This unit has been preset to STORE brightness

This setting does not qualify under ENERGY

STAR. To reduce brightness and energy

consumption, change setting to ‘HOME’. This

setting does qualify under ENERGY STAR.

Auto Setup

TV Location Store

: Adjust

: Select

Signal Type Cable

Press ▲ or ▼ to select “TV Location”, then press

◀ or ▶ to select “Store” or “Home”. This product

qualifies for ENERGY STAR in Home mode

default setting.

NOTE:

This unit has been preset to STORE brightness.

This setting does not qualify under ENERGY

STAR. To reduce brightness and energy

consumption, change setting to ‘HOME’. This

setting does qualify under ENERGY STAR.

The device may not conform to the ENERGY

STAR standard after Reset is performed or the

Backlight is adjusted.

•

Press ▲ or ▼ to select “Signal Type”, then press

◀ or ▶ to select “Cable” or “Air”.

Press ▲ or ▼ to select “Automatic Search”, then

press ▶ or ENTER.

Now the “Auto Setup” starts. After the auto setup

is completed, the TV channel appears on the

screen.

•

Depending on the reception condition, it may

take from 15 minutes to 30 minutes to complete

memorizing digital cable channels. Please be patient.

NOTE:

If you press EXIT in the process of “Auto Setup”,

the Auto Setup stops and changes to the normal

screen.

When you make a menu selection, your changes

occur immediately. You do not have to press EXIT to

see your changes.

TV operation

To turn on the TV, press (POWER).

(POWER indicator on the front of the unit

changes blue. It may take approx. 10 seconds for

a picture to appear on screen.)

Adjust the volume level by pressing VOL (VOLUME)

+ or – . The volume level will be indicated on

the screen by blue bars. As the volume level

increases, so do the number of bars. If the

volume decreases, the number of blue bars also

decreases.

•

Set the Signal Type option to the appropriate

position (see “Air/Cable selection” on page 18).

Press the Direct Channel Selection (0-9, –)

buttons to select the channel.

(If you press only channel number, channel

selection will be delayed for a few seconds.)

TO SELECT ANALOG CHANNELS

1-9: Press 1-9 as needed. Example, to select

channel 2, press 2, then press ENTER.

10-99: Press the 2 digits in order. Example, to

select channel 12, press 1, 2, then press

ENTER.

100-135: Press the 3 digits in order. Example, to

select channel 120, press 1, 2, 0, then press

ENTER.

TO SELECT DIGITAL CHANNELS

Press the first 1-3 digits, then press the – button,

followed by the remaining number.

Example, to select channel 15-1, press 1, 5, –, 1,

then press ENTER.

If a channel is selected with only audio content,

“Audio only” will be displayed on the screen.

If a channel is selected with a weak digital

signal, “Digital channel signal strength is low”

will be displayed on the screen.

The same program may be available on either

an analog channel or a digital channel. You may

choose to watch either format.

If a channel is selected to which you have not

subscribed,

“Digital channel is encrypted” will

be displayed on the screen.

•

VHF/UHF/CABLE CHANNELS

Air Cable

VHF

2-13

VHF

2-13

UHF

14-69

STD/HRC/IRC

14-36 (A) (W)

37-59 (AA) (WW)

60-85 (AAA) (ZZZ)

86-94 (86) (94)

95-99 (A-5) (A-1)

100-135 (100) (135)

01 (4A)

NOTE:

If a channel with no broadcast is selected, the

sound will automatically be muted.

It may take a few seconds for a digital channel

picture to appear on screen after being selected.

To select the video input source

To view a signal from another device connected to

your LCD TV, such as a VCR player, press INPUT

SELECT, then press ▲ or ▼ or corresponding

Number buttons (0-7), then press ENTER. You

can select TV, Video1, Video2, Component, HDMI1,

HDMI2, HDMI3 or PC depending on which input jacks

you used to connect your devices.

Input Select

1.Video1

2.Video2

3.Component

4.HDMI1

5.HDMI2

6.HDMI3

7.PC

[0-7]:Select

0.TV

CH /

Press and release CH / . The channel automatically

stops at the next channel set into memory.

For proper operation, before selecting channels, they

should be set into the memory. See “Memorizing

channels” on page 18.

•

3CQ0821B_En.indd 153CQ0821B_En.indd 15 10/7/10 4:37:23 PM10/7/10 4:37:23 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sansui SLED4680 in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sansui SLED4680 Manual

Product: