489570
18
Zoom out
Zoom in
Previous page
1/44
Next page
18
3
Press or to select “Ch Label”, then press
or ENTER.
The “Ch Label” menu will appear.
4
Press or to select a channel you want to
label, then press .
Ch Label
Label Clear >>
: Adjust
Ch Label
Channel Number 15-1
: Select
5
Press or repeatedly until the character you
want appears in the first space.
Label Clear >>
: Adjust
Ch Label
Channel Number 15-1
: Select
Ch Label A
ENTER:Set
The characters rotation as follows:
SPACE
-
, () @ / + =
-
If the character which you desire appears, press
ENTER.
Repeat this step to enter the rest of the
characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.
6
When you finish inputting the label name, press
EXIT/CANCEL to return to the normal screen.
7
Repeat steps 4-5 for other channel. You can
assign a label to each channel.
To clear a Ch Label
After step 4 above, press or to select “Label
Clear”, then press or ENTER.
NOTE:
The channel labels will be reset after Automatic
Search” on page 15.
Labeling video inputs
The Video Label feature allows you to label each
input source for your TV.
1
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
2
Press or to select “Setup”, then press or
ENTER.
3
Press or to select “Video Label”, then press
or ENTER.
4
Press or to select an input which you want to
label.
5
Press or to select the desired label for that
input source.
Video2 -
Component -
HDMI1 -
HDMI2 -
Video Label
: Adjust
: Select
Video1 -
: Uses the default label name
VCR : Video cassette recorder
DVD : DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
HD : HDMI device (only for HDMI inputs)
6
Press EXIT/CANCEL to return to the normal
screen.
Setting the V-Chip
An age limitation can be set to restrict children
from viewing or hearing violent scenes or
pictures that you may choose to exclude. The
restriction applies to “TV Rating” and “Movie
Rating” if this data is transmitted. You may set
this restriction separately. To use the V-Chip
function, you must register a password.
To register a password
1
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
2
Press or to select “Lock”, then press or
ENTER.
3
Select and enter your password (4 digits) using
Number buttons (0-9), then press ENTER.
[0-9]
Lock
New Password
* * *
_
: Select ENTER:Set
” appears instead of the number.
4
Enter the same password again to confirm, then
press ENTER.
The password is now registered.
NOTE:
If you forget the password, contact Customer
Service at 1-800-289-0980 for assistance.
Your original remote control will be required.
To avoid forgetting the password, write it down and
keep in a safe place.
To set the V-Chip
1
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
2
Press or to select “Lock” menu, then press
or ENTER.
3
Use Number buttons (0-9) to enter your
password, then press ENTER. Then Lock menu
will appear.
51F0501A_eng.indd 1851F0501A_eng.indd 18 5/2/08 3:15:15 PM5/2/08 3:15:15 PM
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sansui HDLCDVD323 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sansui HDLCDVD323 in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info