489568
15
Zoom out
Zoom in
Previous page
1/43
Next page
15
ENGLISH
Starting setup
The Starting Setup menu appears the first time
you turn on the TV, and assists you to select the
menu language, specify the Air/Cable setting,
and program your channels automatically.
IMPORTANT: Make sure that the antenna or cable
TV system connection is made!
1
To turn on the TV, press POWER (POWER
indicator on the front of the unit changes green.
It may take approx. 10 seconds for a picture to
appear on screen.). The starting setup function
begins. Press or to select your desired
language.
Automatic Search Start
Auto Setup
Language English
Signal Type Cable
: Adjust
: Select
2
Press or to select “Signal Type”, then press
or to select “Cable” or Air”.
3
Press or to select Automatic Search”, then
press ENTER or .
4
Now the Auto Setup” starts. After the starting
setup is completed, the TV channel appears on
the screen.
Depending on the reception condition, it may
take from 15 minutes to 30 minutes to complete
memorizing digital cable channels. Please be
patient.
NOTE:
If you press EXIT/CANCEL in the process of “Auto
Setup”, the Starting Setup stops and changes to the
normal screen.
When you make a menu selection, your changes
occur immediately. You do not have to press EXIT/
CANCEL to see your changes.
When you are finished programming the menus,
press EXIT/CANCEL.
Setting the on-screen
language
You can choose from three different languages
(English, French and Spanish) for the on-screen
displays.
Select the language you prefer first, then
proceed with the other menu options.
1
Press POWER.
2
Press TV/DVD to select TV mode.
3
Press SETUP/TV MENU. The TV menu screen
will appear.
Audio
Channel
Lock
Setup
Main Menu
Picture
>>
: Select ENTER:Set
4
Press or to select “Setup”, then press or
ENTER.
5
Press or to select “Language”.
Video Label >>
Auto Shut Off Off
Reset >>
Setup
Closed Caption >>
Language English
: Adjust
: Select
6
Press or to select the desired language:
English, French (Français) or Spanish (Español).
7
Press EXIT/CANCEL to return to the normal
screen.
NOTE:
If no buttons are pressed for more than about 60
seconds, the menu screen will return to normal
operation automatically.
Memorizing channels
This TV is equipped with a channel memory
feature which allows channels to skip up or down
to the next channel set into memory, skipping
over unwanted channels. Before selecting
channels, they must be programmed into the
TV’s memory. To use this TV with an antenna, set
the Signal Type option to the Air mode. When
shipped from the factory, this menu option is in
the Cable mode.
Air/Cable selection
1
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
2
Press or to select “Channel”, then press
or ENTER.
3
Press or to select Auto Ch Memory”, then
press or ENTER.
4
Press or to select “Signal Type”.
5
Press or to select Air” or “Cable”.
Air - VHF/UHF channels
Cable - CABLE TV channels
Automatic Search Start
Auto Ch Memory
Signal Type Cable
: Adjust
: Select
6
Press EXIT/CANCEL to return to the normal
screen.
52K0221B_eng.indd 1552K0221B_eng.indd 15 6/6/09 4:57:56 PM6/6/09 4:57:56 PM
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sansui HDLCDVD265 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sansui HDLCDVD265 in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info