489595
12
Zoom out
Zoom in
Previous page
1/28
Next page
12
1 Press the MENU button. Press
the SET/TRACKING + or button
to select the SYSTEM SET-UP
option, then press the ENTER
button.
2 Press the SET/TRACKING + or
button to select the DAYLIGHT
SAVING TIME option, then press
the ENTER button.
3 Press the SET/TRACKING + or
button to select one of the
options, then press the ENTER
button. Press the MENU button
until the MENU screen is cleared.
ON: for manual setting
(forward one hour)
OFF: for manual setting
(back one hour)
AUTO: for automatic setting
(read XDS in the signal)
NOTES: When shipped from factory, the DAYLIGHT
SAVING TIME option is set to AUTO position.
When the clock is not set, Daylight Saving
Time setting is not available.
When there is no Daylight Saving Time in your
area, always select OFF position in step 3.
When you want to set the Daylight Saving Time manually,
on the first Sunday in April you set to ON, and on the last
Sunday in October you set to OFF.
M E N U
TIMER REC SET
TV SET-UP
CH SET-UP
AUTO REPEAT ON OFF
SYSTEM SET-UP
+//ENTER/MENU
SYSTEM SET-UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+//ENTER/MENU
You can set the Daylight saving time automatically or
manually.
ON
OFF
AUTO
+//ENTER/MENU
DAYLIGHT SAVING TIME
The Auto Clock function will automatically set the
built-in clock (Month, Day, Year and Time) when the
TV/VCR is connected to an Antenna or Cable system
and it is turned off. As the TV/VCR searches for a
receivable station in your area and it receives a
broadcast signal for Auto Clock, the Auto Clock needs
several minutes to set itself.
The Auto Clock Adjustment will be performed at 12:00 PM
everyday if you turn off the TV/VCR.
If you use a cable box and you want Auto Clock adjust-
ment to be performed, the cable box must be left on.
The Auto Clock Adjustment is not effective when there
is a difference of more than 5 minutes exists between
the built-in clock time and the actual time.
4 Press the SET/TRACKING + or button to select your
time zone, then press the ENTER button.
ATLANTIC : GMT 4 hours
(GMT: Greenwich Mean Time)
EASTERN : GMT 5 hours
CENTRAL : GMT 6 hours
MOUNTAIN : GMT 7 hours
PACIFIC : GMT 8 hours
ALASKA : GMT 9 hours
HAWAII : GMT 10 hours
AUTO : AUTO SET
5 Press the MENU button twice to return to the normal
screen.
When shipped from factory the AUTO CLOCK option is
set to ON.
But if you do not want Auto Clock set (Adjustment):
1 Turn on the TV/VCR.
2 Press the MENU button.
3 Press the SET/TRACKING + or button to select the
SYSTEM SET-UP option, then press the ENTER
button.
4 Press the SET/TRACKING + or button to select the
AUTO CLOCK option.
5 Press the ENTER button to select OFF.
6 Press the MENU button repeatedly to return to the
normal screen.
When the AUTO CLOCK is set to OFF, the Auto Clock
adjustment does not function.
Set the clock manually (see page 13).
1 Connect the Antenna or Cable system.
If you use a cable box, turn it on.
2 Plug the AC Power cord to the AC outlet.
3 Make sure the TV/VCR is turned off.
If you press the POWER button, the Auto Clock set is
not effective.
4 Wait at least three minutes and press the POWER
button.
5 Press the CALL button to check the clock on the screen.
6 If the clock is not set, check the Antenna condition. The
Auto Clock may not function properly if the reception
condition is not good.
NOTE: To be able to select the standard time, the clock
must first be set by AUTO CLOCK once.
In the rare event that you live within broadcast range of
two stations in two different time zones, the TV/VCR
may recognize the wrong station for the Auto Clock set.
To correct the situation:
1 Press the MENU button.
2 Press the SET/TRACKING + or button to select the
SYSTEM SET-UP option, then press the ENTER button.
3 Press the SET/TRACKING + or button to select the
STANDARD TIME option, then Press the ENTER
button.
AUTO CLOCK SETTING
AUTO CLOCK SETTING
AUTO CLOCK ADJUSTMENT
TO SET AUTO CLOCK TO OFF
TO SET STANDARD TIME
DAYLIGHT SAVING TIME SETTING
5A30501A E P10-17 12/09/2001, 17:3012
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sansui COM3100C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sansui COM3100C in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info