489486
28
Zoom out
Zoom in
Previous page
1/52
Next page
28
Playback procedure
1
Press OPEN/CLOSE on
the unit or the remote con-
trol.
The disc tray will open.
2
Place a disc onto the tray.
Position it with the printed
label side up, align it with
the guides, and place it in
its proper position.
NOTES:
If a non-compatible disc is loaded, “In-
correct Disc”, “Region Code Error” or
“Parental Error” will appear on the TV
screen according to the type of loaded
disc. If these appear, check your disc
again (see pages 25 and 38).
Some discs may take a minute or so to
start playback.
A “Prohibition” symbol
may appear
at the upper left of the screen. This
symbol means either the feature you
tried is not available on the disc, or the
unit can not access the feature at this
time. This does not indicate a problem
with the unit.
When you set a single-faced disc label
downwards (ie. the wrong way up) and
press PLAY or OPEN/CLOSE on the
unit, “Reading” will appear on the dis-
play and then “Incorrect Disc” will be dis-
played.
Some playback operations of DVDs may
be intentionally fixed by software pro-
ducers. Since this unit plays DVDs ac-
cording to the disc contents the software
producers designed, some playback
features may not be available. Also re-
fer to the instructions supplied with the
DVDs.
4
Press PLAY or OPEN/
CLOSE.
The disc tray closes auto-
matically.
On the screen,
changes
to “Reading” and then play-
back will commence.
A menu screen may ap-
pear on the TV screen, if
the disc has a menu
feature. In this case,
press
, , , or
ENTER to operate a
menu feature.
3
Press STOP to end playback.
The unit memorizes the stopped point, depending on the
disc. “
” appears on the screen for approx. 4 seconds.
” keeps blinking in the display until the playback is
stopped completely. Press PLAY to resume playback
(from the scene point).
If you press STOP again(“
” appears on the screen) or
unload the disc, the unit will clear the stopped point.
5
Then press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press POWER.
The disc tray closes automatically and unit turns off.
Reading
5K31101A [E] P27-32 2/5/04, 4:15 PM28
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sansui CDVD1300W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sansui CDVD1300W in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info