Manual Sanitas SGS 43 (page 14 of 40) (English, German, French, Spanish)

626694

Zoom out

Zoom in

1/40

Your measured weight is displayed shortly after this (Fig 4).

The scale switches off 10 seconds after you step down from it. The result remains vi-

sible during this time.

Make sure that you always switch on the scale first and wait for the display to show

„0.0“ (Fig. 2) before stepping on it.

Option 2: switch on scale platform, then control panel

Audibly, briefly and firmly tap the scale with your foot to activate the vibration sensor. The LED first shows

red and then switches to green after about 5 seconds.

Press the „ON/OFF“ button on the display module. If the control panel is receiving the signal from the sca-

le it shows „0.0“ (Fig. 2).

Now the scale is ready to measure your weight. Now step onto the scale. Stand still on the scale with your

weight distributed evenly between both legs. The scale immediately begins to measure your weight. The

display shows „----“ (Fig. 3).

Your measured weight is displayed shortly after this (Fig 4).

The scale switches off 10 seconds after you step down from it. The result remains visible during this time.

Make sure that you always switch on the scale first and wait for the display to show „0.0“ (Fig. 2) before

stepping on it.

Switching off the scale

The scale and the control panel always switch off automatically after 10 seconds.

Press the „ON/OFF“ button to switch off the display module manually.

9. Replacing batteries

The control panel is equipped with a „replace battery“ indicator.

The display shows „Lo-1“ and „Lo-2“ when the batteries are beginning to run down and the scale switches

off automatically. The batteries must be replaced as soon as possible. If the display shows „Lo-1“, the bat-

teries in the scale must be replaced (4 x 1.5 V AAA). If the display shows „Lo-2“, the batteries in the con-

trol panel must be replaced (2 x CR2032 lithium batteries).

The batteries in the scale must also be replaced if the LED on the scale does not light after activating the

vibration sensor (4 x 1.5 V AAA batteries).

Note:

• When changing batteries, always use batteries of the same type, brand and capacity.

• Do not use rechargeable batteries.

• Use batteries that are free of heavy metals.

10. Cleaning and care of the unit

The unit should be cleaned occasionally.

Clean using a damp cloth, to which you can apply a little detergent if necessary. Do not use abrasive de-

tergents and never immerse the unit in water.

----

Fig. 3

Fig. 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sanitas SGS 43 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sanitas SGS 43 Manual

Product: