579873
8
Zoom out
Zoom in
Previous page
1/56
Next page
8
and
(1) Select between (A) treatment programme, (B) frequency and (C) treatment
time.
(2) The DOWN key
is used to reduce pulse intensity for both channels
during stimulation.
MENU
(1) Navigation between the submenus TENS, EMS and MASSAGE.
(2) Return to (A) programme selection window or (B) main menu.
ENTER
(1) Menu selection.
(2)
To confirm a selection made with UP/DOWN, apart from channel intensity.
CH1+, CH1-, CH2+, CH2-
Setting pulse intensity.
5. Start-up
1.
Remove the belt clip from the machine, if attached.
2.
Press on the battery cover at the back of the machine and
push it to the side.
3.
Insert three AAA 1.5 V alkaline batteries. Make absolutely
sure that you insert the batteries with the correct polarity as
marked.
4.
Replace the battery cover carefully (Fig. 1).
5.
Attach the connecting cable to the electrodes (Fig. 2).
Note: The electrodes have a clip fastener to ensure easy
connection.
6.
Insert the connecting cable connector into the socket at the
back of the machine (Fig. 3).
7.
Do not pull, twist or make any sharp kinks in the cables
(Fig. 4).
6. Programme overview
6.1 Basic information
The Digital EMS/TENS unit has a total 50 programmes:
20 TENS programmes
20 EMS programmes
10 MASSAGE programmes
With all programmes, you can set the length of application and (for each of
the two channels) pulse intensity separately.
Besides this, with TENS and EMS programmes 11– 20, you can also change
the pulse frequency of the individual cycles in order to adapt the stimulation
effect to the structure of the site of application.
Cycles are the different sequences making up the programmes. They auto-
matically run one after the other and increase the efficacy of stimulation on
different types of muscle fibre and combat premature muscle fatigue.
You will find the standard stimulation parameter settings and information on
placing the electrodes in the following programme charts for TENS, EMS and
MASSAGE.
Fig. 1
Fig. 3
Fig. 2
Fig. 4
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanitas SEM 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanitas SEM 40 in the language / languages: English, Danish, Swedish, Finnish as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sanitas SEM 40

Sanitas SEM 40 User Manual - German, French, Italian, Portuguese - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info