681493
20
Zoom out
Zoom in
Previous page
1/72
Next page
20
4. Preparing the measurement
Inserting the batteries
Open the battery compartment lid.
Insert four 1.5V AA (alkaline type LR6) batteries. Make
sure that the batteries are inserted the correct way round.
Do not use rechargeable batteries.
Close the battery compartment lid again carefully.
All display elements are briefly displayed, 24 h flashes
in the display. Now set the date and time as described
below.
If the low battery indicator
is permanently displayed,
you can no longer perform any measurements and must re-
place the batteries. Once the batteries have been removed
from the device, the time must be set again.
The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
The codes below are printed on batteries containing
harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
Setting the hour format, date and time
It is essential to set the date and time.
Otherwise, you will not be able to save
your measured values correctly with a
date and time and access them again
later.
To set the date and time, proceed as
follows:
Insert the batteries, or
press and
hold the setting button
SET
for at
least 5 seconds if the batteries have
already been inserted.
Select 12h or 24h mode using the function buttons -/+.
Press
SET
to confirm. The year display will start to flash.
Set the year with the function buttons -/+ and confirm with
SET.
Set the month, day, hour and minute and confirm each
with the
setting button
SET.
The blood pressure monitor switches itself off automatically.
Setting the alarm
You can set 2 different alarm times to remind yourself to
take the measurement. To set the alarm, proceed as follows:
Press and hold the function buttons - and + simultaneously
for 5 seconds.
Alarm 1 is shown in the display, “on” or “off” flashes
at the same time. With the function buttons -/+, choose
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanitas SBM 22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanitas SBM 22 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 6,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info