403399

Sanitas sbm 20 Manual

10
Zoom out
Zoom in
Previous page
1/32
Next page
10
5. Preparation
5.1 Inserting the batteries
• Removethebatterycoverfromthebackof
themonitor.InsertfourAA1.5Valkalinebat-
teries. making absolutely sure that you insert
them with the correct polarity as marked. Ne-
ver use rechargeable batteries.
• Replacethebatterycovercarefully.Nowyou
can set the date and time.
5.2 Setting the date and time
• Firsttheyearstartsblinking.PressM1toincreasenumbers,orM2todecrease.Set
the year accordingly and confirm with the ON/OFF button.
• UsingtheM1andM2buttons,nowenterthemonth.Confirmwiththe
ON/OFF
button.
• NowenterthedayusingtheM1andM2buttons.Confirmwiththe
ON/OFF
button.
• Nowyoucansetthetime.Thisisdisplayedin24-hourmode.Firstenterthehours,
confirm with the
ON/OFF
buttonandthenentertheminutes.Oncethisisconfirmed
using the
ON/OFF
button, the device automatically returns to normal time mode.
5.3 Changing batteries
If the battery change is blinking, the batteries are already too low. Even though
measurement is still possible, the batteries should be replaced soon. If the battery
change
is continuously illuminated, measurement is no longer possible and you
mustreplaceallthebatteries.Oncebatterieshavebeenremovedfromthedevice,
the time must be reset. Any measurement results that have been stored are however
retained.
Usedbatteriesdonotbelonginthehouseholdwaste.Youarelegally
obliged to dispose of the batteries. Dispose of them via your specialist
electrical supplier or local collecting point for recyclable waste. Note: Bat-
teries containing pollutant substances are marked as follows: Pb = Battery
contains lead, Cd = Battery contains cadmium, Hg = Battery contains
mercury. The battery contained in this instrument is pollutant-free.
PleasedisposeoftheapplianceinaccordancewiththeDirective2002/96/ECon
WasteElectricalandElectronicEquipment(WEEE).Incaseofqueries,please
contact the municipal authorities responsible for waste disposal in your area.
5.4 Mains operation
Youcanalsooperatethisdevicewithamainsadapter.Nobatteriesshouldbeinthe
battery compartment for this. The mains adapter is available from retailers or from
the service address under order no. 071.01.
The blood pressure monitor should only be used with the mains adapters specified
here. The mains adapter should only be connected to the mains voltage indicated
ontheratingplate.Onceyouhavedisconnectedthedevicefromthemains,thedate
and time on the blood pressure monitor are lost. Any measurement results that have
been stored are however retained.
Pb Cd Hg
-
+
-
+
+
-
+
-
4 x AA (LR6) 1,5 V
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanitas sbm 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanitas sbm 20 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info