626686

Sanitas SBG 43 Manual

24
Zoom out
Zoom in
Previous page
1/64
Next page
24
14. What if there are problems?
If the scale detects and error when measuring, the following is displayed.
Display Cause Remedy
The maximum load-bearing capacity of
150 kg was exceeded.
The load must not exceed 150 kg.
The scale batteries are almost flat. Replace the batteries of scale.
The control panel batteries are almost
flat.
Replace the batteries of control panel.
Faulty or no transmission between scale
platform and control panel.
Place the scale on a flat surface and
activate it correctly (wait for the display
to show „0.0“) and repeat the measure-
ment (see page 19).
No display The batteries in the control panel are enti-
rely flat.
Replace the batteries (see page 22).
The batteries in the control panel are not
correctly installed.
Check that the polarity is correct (Note
t
he graphic in the battery compartment.).
No measurement possible
Possible errors Remedy
The scale was not activated before being
stepped on. If you step onto the scale before
„0.0“ appears in the display,
it will not function correctly.
Activate the scale correctly (wait for „0.0“) and re-
peat the measurement.
Switch on the control panel and the scale before the
measurement.
If necessary, wait 30 seconds and then repeat the
measurement.
Interference between scale and
control panel.
Remove and replace the batteries in the scale and
control panel or make sure that the transmitter and
receiver are not covered.
The control panel is too far from the scale. Reduce the distance between the scale and control
panel.
The scale batteries are flat. Replace the batteries (see page 22).
The connection between control panel and scale
is interrupted.
Do not cover the receiver and transmitter.
Incorrect weight measurement
Possible errors Remedy
Scale is on carpet. Place scale on a flat, solid surface.
Scale zero setting is incorrect. Switch on scale and wait until it switches off auto-
matically (LED off). Then repeat measurement.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanitas SBG 43 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanitas SBG 43 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info