Manual Sanitas SBF 08 (page 9 of 32) (English, German, French, Italian)

626653

Zoom out

Zoom in

1/32

• On delivery the scale is set to the units “cm” and “kg”. A switch located on the back of the scale enables

you to change to “inch”, “pound” and “stones” (lb, St).

• Place the scale on a firm level floor; a firm floor covering is required for correct measurement.

• The scale should be cleaned occasionally with a damp cloth. Do not use abrasive detergents and never

immerse the scale in water.

• Protect the scale against hard knocks, moisture, dust, chemicals, major temperature fluctuations and

heat sources which are too close (stove, heating radiators).

• Repairs may only be carried out by Beurer customer service or authorized dealers. Before submitting

any complaint, first check the batteries and replace them if necessary.

Storage and maintenance

The accuracy of the measurements and service life of the device depend on its careful handling:

IMPORTANT

• The unit should be cleaned occasionally. Do not use abrasive detergents and never immerse the unit in

water.

• Ensure that no liquid gets on the scale. Never dip the scale into water. Never wash it under running wa

ter.

• Do not place any objects on the scale when it is not being used.

• Protect the unit against hard knocks, moisture, dust, chemicals, major temperature fluctuations and heat

sources which are too close (stoves, heating radiators).

• Do not press the buttons using excessive force or with pointed objects.

•

Do not expose the scale to high temperatures or strong electromagnetic fields (e.g. mobile phones).

3. Information on the diagnostic scale

The measuring principle of the diagnostic scale

This scale operates according to the B.I.A. principle (bioelectric impedance analysis). This enables physi-

cal relationships to be measured within seconds by means of an undetectable, completely harmless

electric current. The body fat percentage and other physical relationships in the body can be determined

by measuring the electrical resistance (impedance), and the inclusion in a calculation of constants and in

dividual parameters (age, height, gender, degree of activity).

Muscle tissue and water have good electrical conductivity, and therefore lower resistance.

Bones and fatty tissue, on the other hand, have low conductivity, as fat cells and bones conduct hardly

any current as a result of their very high resistance.

Please be aware that values obtained from the diagnostic scale represent only an approximation of actual

analytical medical data. Only a specialist physician can accurately determine body fat, body water, muscle

percentage and bone structure using medical procedures (e.g. computed tomography).

General tips

– If possible, always weigh yourself at the same time of day (preferably in the morning), after using the toi-

let, on an empty stomach and unclothed, in order to achieve comparable results.

– Important for the measurement: body fat can only be measured when barefoot and with the soles of the

feet slightly moist. Completely dry soles can result in unsatisfactory measurements due to inadequate

conductivity.

– Stand still during the measurement.

– Wait a few hours after unaccustomed strenuous activity.

– Wait approx. 15 minutes after getting up in the morning to allow the water in the body to distribute.

Limitations

When measuring body fat and other values, deviating and implausible results may occur in:

– children under approx. 10 years,

– competitive athletes and body builders,

– pregnant women,

– persons with fever, undergoing dialysis treatment or with symptoms of edema or osteoporosis,

– persons taking cardiovascular medication,

– persons taking vascular dilating or vascular constricting medication,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sanitas SBF 08 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sanitas SBF 08 Manual

Product: