667073
8
Zoom out
Zoom in
Previous page
1/84
Next page
7
8. You will then need to set 'Keep network connected.' By default, your radio will shut down its
WiFi connection when it is in standby. This minimizes power consumption but it does mean
that you will need to switch that radio on manually in order to use either the 'Play to' function
or any other remote control software. If you need to be able to remotely control the radio
even when it has been put into standby, then rotate the Tuning Control Rotary to highlight
'YES' to activate this function or 'NO' to deactivate this function. you can also choose to keep
the network connected by using the ‘Keep network connected’ option in the network setting
menu. In the standby mode display either the WiFi signal indicator is shown with or without a
cross through it according to the chosen network settings.
9.
The display will then show a list of WiFi regional options for the network set up. Rotate the
Tuning Control Rotary to highlight the required region and then press the Tuning Control
Rotary to select it. Do this even if planning to use the wired Ethernet connection. Your radio
will then scan for available WiFi networks. If using WiFi we recommend that the WiFi antenna
is positioned vertically.
10. The radio will enter the Network Settings Wizard and will display ‘Scanning…’. After a short
while the display will show a list of the available WiFi networks. If you are intending to use
the WiFi connection, go to step 11.
To use the Ethernet connection to your router (with automatic configuration). Rotate the
Tuning Control Rotary to select the “[Wired]’ menu item. Press the Select button and the
radio will attempt to connect. If your network allows automatic conguration (which is normal)
the radio will acquire a network address. The screen should say ‘Connecting…’, and then
‘Setup wizard completed’. Press the Select button to exit the setup wizard and show the main
menu. There are two indicator lights incorporated into the connector. If you have problems
with your wired connection, they may help you to identify the possible cause of the problem.
Yellow ON = Link established; OFF = no connection Yellow Flashing = Data transfer Green
ON = 100 Mbits/sec link; OFF = 10 Mbits/sec ilnkIf your network does not support automatic
configuration or if you wish to set it up manually then you should select ‘[Manual config]’
instead of selecting ‘[Wired]’ in the Network Wizard.
11. You will first need to identify your network in the list of network names presented by the
Network Wizard. If no networks are found then you may have to get your wireless router
working (please see the instructions supplied with it) or you may be too far from the router.
When the radio finds your wireless network, it displays the Network Name (SSID) for the
wireless access point on the screen. This is a name that is allocated to the access point in
your router by the person who set up the network for example: ‘Jones family’ or ‘Paul’s
network’. If the router supports WiFi Proteced Setup, then ‘[WPS]’ will be shown in front of
the SSID. It is possible, and in some locations highly likely, that your radio will nd more than
one wireless network, in which case you should choose which one you need to connect to.
Most of Europe
Wlan region
Update from DAB
Update from FM
Update from Network
No update
Auto update
*
UTC+00:00:Dublin,Lon
UTC+00:30:
UTC+01:00:Madrid,Arr...
UTC+01:30:
UTC+02:00:Athens,Ca...
Set timezone
Network wizard
Scanning...
Network settings
Keep network connected?
Network settings
SSID
Smith
Jones
[Rescan]
[Wired]
[Manual conflg]
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean WFR-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean WFR-70 in the language / languages: English as an attachment in your email.

The manual is 4,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean WFR-70

Sangean WFR-70 User Manual - German - 84 pages

Sangean WFR-70 User Manual - Dutch - 84 pages

Sangean WFR-70 User Manual - French - 84 pages

Sangean WFR-70 User Manual - Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info