667074
41
Zoom out
Zoom in
Previous page
1/81
Next page
40
Wake On LAN
IfyouuseacomputerasaUPnPserverforplayingyourmusiclesviayourradio,youmaynot
wishtokeepthatcomputerrunningwhenyouarenotusingtheradio.Ifyourcomputerissuitably
congured,itcaneithershutdown,orenterastandbyorhibernationstatewhenitisnotbeing
used.
Your radio can wake up a computer which has shut down using a Wake On LAN command via
the network provided that the radio has previously connected to a UPnP server application on
thatcomputer.Acomputerwhichisnotcurrentlyactivewillbeshownwithaquestionmarkinthe
list of UPnP servers.
ManycomputerswillnotrespondtoWakeOnLANcommandsfromtheradioinallmodes,and
mayrequiresoftware,devicedriver,BIOS,hardwareorrouter configuration changesforthis
function to operate. Failure of a computer to respond to Wale On Lan is not considered a fault of
the radio.
Prune servers
Your radio stores details of the UPnP servers that it has seen via its network connection in its
internalmemory.Ifyouusetheradioatdifferentlocationsyoumayndthatthereareservers
listed by the radio that are no longer available. The prune servers functions allows the list to
bereinitializedsothatonlyactiveUPnPserversonthecurrentlyconnectednetworkareshown
whenselecting‘SharedMedia’fromtheMusicPlayermenu.
1. Press the Menu buttontoenterthemainMusicPlayermenu.
2. Rotate the Tuning Control Rotary until‘Pruneservers’ishighlightedonthedisplay.Pressthe
control.
3.ToremoveserversthatarenolongerrequiredrotatetheTuning Control Rotary until‘Yes’
is highlighted on the display. Press the Tuning Control Rotary to cause the servers to be
removed.
4.If youdonotwishtopruneserversrotatetheTuning Control Rotary tohighlight‘No’and
press the Tuning Control Rotary toconrm.
?DAD: LES:
?JENNY: Jenny’s music
HOME_PC: Mum’s music
Shared media
>
>
>
Music player
My Playlist
Repeat play: Off
Shuffle play: Off
Clear My playlist
Prune servers
>
Prune shared media
wake on LAN servers?
Prune invalid
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean WFR-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean WFR-30 in the language / languages: English as an attachment in your email.

The manual is 9,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean WFR-30

Sangean WFR-30 User Manual - German - 81 pages

Sangean WFR-30 User Manual - Dutch - 81 pages

Sangean WFR-30 User Manual - French - 81 pages

Sangean WFR-30 User Manual - Spanish - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info