567119
18
Zoom out
Zoom in
Previous page
1/84
Next page
17
Manual network conguration
If you do not wish to use DHCP for automatic conguration, or if your network is congured with
a hidden SSID, then you will need to enter some network settings manually. (Note - a hidden
SSID may prevent casual observers from detecting your network, but it is not recommended as a
means of network security.)
1. From the radios 'Settings'>'Network settings' menu, touch Manual settings. You must then choose
whether to connect using 'Wired' or 'Wireless' connections. If you choose 'Wireless' there are as
many as eleven settings screens, shown by the '1 of 11' progress marker at the top of the display.
If you choose 'Wired' there are seven screens and the progress marker will reect this, although
the steps to set up the network parameters are basically the same.
2. The next menu asks whether you wish to use DHCP to congure your network parameters (IP
address, subnet mask, gateway address, etc.). Unless you are familiar with networking and
related terminology, we recommend that you allow the use of DHCP. Choose DHCP Yes unless
you need to specify the network details manually.
If you have chosen 'Wired' and then DHCP Yes, your radio should now establish a connection
to the router using the Ethernet cable. Please skip to step 11 on page 20.
If you chose 'Wireless' and DHCP Yes, please skip to step 6 in order to set up the wireless
connection details. If you chose DHCP No for either connection method, the next step is to set
up the IP address.
3. The manually specied IP address should be chosen to be compatible with the settings in your
router and must be a unique address on your network. If you are using DHCP for some devices
and static (manually congured) IP addresses for others, the IP address used should fall outside
the range that the router may allocate using DHCP. Typically, the rst three groups of digits will
be the same for all devices on your network (Text entry is described on page 11). The display
may show an address of 0.0.0.0. To delete a character touch backspace. To clear, touch and
hold the backspace. Use digits and fullstop to enter the IP address, e.g. 192.168.1.25. Touch
the tick symbol to conrm. When the IP address has been entered, the subnet mask should be
entered. The subnet mask denes which parts of the IP address are common across your network.
For most small networks the subnet mask will be 255.255.255.0 and this is entered in the same way.
4. The Gateway address is normally the IP address of the router through which the radio connects
to the internet and is entered in the same way as the previous address.
Network Wizard
Paul’s network <WPS>
<Rescan>
<Wired Network>
Manual settings
15:05
26 Jun 2010
Settings
192.168.1.25
1 3 4 5 6 7 8 9 0
! @
# $ % &
( )
*
_ +
-
=
: ;
.
Settings
123
2
IP address: [3/11]
I
Manual settings [1/11]
Add Wireless Network
Add Wired Network
15:05
26 Jun 2010
Settings
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean WFR-2D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean WFR-2D in the language / languages: English as an attachment in your email.

The manual is 26,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean WFR-2D

Sangean WFR-2D User Manual - German - 84 pages

Sangean WFR-2D User Manual - Dutch - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info