567119
14
Zoom out
Zoom in
Previous page
1/84
Next page
13
Connecting to your computer network-cont.
If your network allows automatic conguration (which is normal) the radio will acquire a network
address. The screen should say ‘Connecting,’ and then ‘Setup Wizard completed.’ Touch OK to
exit the setup wizard, the radio will enter Standby mode. You can then skip to step 20 .
There are two indicator lights incorporated into the RJ-45 connector. If you have problems with
your wired connection, they may help you to identify the possible cause of the problem.
Yellow ON= Link established ; OFF =no connection
Yellow Flashing= Data transfer
Green ON= 100 Mbits/ sec link; OFF= 10 Mbits/ sec link
If your network does not support automatic conguration or if you wish to set it up manually then
you should select Manual Settings instead of selecting Wired in the Network Wizard, then see
the section of ‘Manual network conguration.’
13. If you plan to use a WiFi connection, you will rst need to identify your network in the list of
network names presented by the Network Wizard. If no networks are found then you may have
to get your wireless router working (please see the instructions supplied with it) or you may be
too far from the router. When the radio nds your wireless network, it displays the Network
Name (SSID) for the wireless access point on the screen. This is a name that is allocated to
the access point in your router by the person who set up the network-for example’ Jones
family’ or ‘Paul’s network.’ If the router supports WiFi Protected Setup, then[WPS]’ will be
shown in front of the SSID. It is possible, and in some locations highly likely, that your radio
will nd more than one wireless network, in which case you should choose which one you need
to connect to.
14. Scroll through the list to see the SSID for each wireless network that has been found. If your
network is shown proceed to step 16 on the next page. If it is not shown then proceed to step 15.
If you make a mistake at any point, use the Back button to go back to the previous screen.
Setup Wizard
Setup wizard completed.
OK
15:09 23 Jun 2010
00:00
Network Wizard
<WPS>
<Rescan>
<Wired Network>
Manual settings
Setup Wizard
00:00
Network Wizard
Smith
Jones
<WPS>
<Rescan>
Setup Wizard
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean WFR-2D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean WFR-2D in the language / languages: English as an attachment in your email.

The manual is 26,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean WFR-2D

Sangean WFR-2D User Manual - German - 84 pages

Sangean WFR-2D User Manual - Dutch - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info